DaveInDenver
Middle Income Semi-Redneck
While we occasionally recognize the existence of S.I. units we yet choose to remain with the pound-force (lbf) in one disrespectful former Colony.
Looking for a non made in china snatch block, Any recommendations?
- Thread starter airbats801
- Start date
Dirt Rider
Well-known member
Check with these guys
www.westechrigging.com
Rigging Equipment & Rigging Supplies | Bishop Lifting
The nation's largest rigging equipment supplier with coast-to-coast coverage. Buy Rigging Equipment & Rigging Supplies Online at the Best Prices.
www.westechrigging.com
I have to say I possess 3 snatch blocks and have been fortunate to only have used them a couple of times. The warns are a semi-permanent loan from a family member.
I keep this one saved in my eBay account just in case I ever need or want another. It does not have any country markings but it is identical to the warn above other than being galvanized. I don't know if it is a clone or built at the same factory but it has worked for me.
Winch Snatch Block, 20000 lb - 88899
www.warn.com
Winch Snatch Block - 24,000 lb Capacity
www.warn.com
Snatch Block, Yarding Block Wire Rope Cable Pulley for 4.5 Tons - 5" | eBay
This Snatch Block, Yarding Block Wire Rope Cable Pulley is designed for use in lifting machines, pulleys, and rigging. It is made by the brand Hy-Weld and is suitable for handling up to 4.5 tons of weight. The block measures 5 inches and is ideal for use with wire ropes and cables. This...
www.ebay.com
airbats801
Member
wow, I just got back into this thread. I dont get why all the hate because I was trying to support someone trying to actually make something in the states? There is plenty of stuff made in china thats fine. It's hard not to find thing made there. I find it funny to get hate from the internet warriors. I literally trust my life almost on a daily basis at work with rigging. I rebuild turbines for general electric on the union side. I'm a journeyman millwright and a certified rigger. We only use usa made rigging as we know it meets safety standards. Hell, whats a crosby shackle cost over some chinese one, 15 bucks? You can grab a campbell for 16. some who knows what chinese shackle you have sitting on the bumper of your jeep probably cost you at least 10.
Anyhow, end rant.
Thank you for the replies. Ended up with a masterpull.
Anyhow, end rant.
Thank you for the replies. Ended up with a masterpull.
jgaz
Adventurer
Nothing but Crosby in our shop. Not saying Chinese is all bad but I’m not in a position to tell.
The procedure below is at least a weekly occurrence in our lab. I certainly get what you mean
@airbats801
I certainly can relate to “trusting my life” on equipment
The procedure below is at least a weekly occurrence in our lab. I certainly get what you mean
@airbats801
I certainly can relate to “trusting my life” on equipment
I just deleted several posts that seem to be political...please keep it on topic (which may be hard given the title of this thread)
ramblinChet
Well-known member
If you are a man who will not compromise and are looking for the finest vehicle snatch block that is Made in the USA...
Double the effective pulling power of your winch with AEV’s snatch block. Featuring ArmorGalv® coating, self-lubricating Oilite® bushing with a specialized polymer pulley, and an industry-first, inward-rolled eyelet for safe engagement with ropes and soft-shackles. This is suitable for use on both standard and heavy duty applications.
Double the effective pulling power of your winch with AEV’s snatch block. Featuring ArmorGalv® coating, self-lubricating Oilite® bushing with a specialized polymer pulley, and an industry-first, inward-rolled eyelet for safe engagement with ropes and soft-shackles. This is suitable for use on both standard and heavy duty applications.
I recently swapped to this from a heavy steel block
www.tacticalrecoveryequipment.com
Saved a bunch of weight going to this style.
.JPG?width=960&height=720&fit=bounds)
.JPG?width=960&height=720&fit=bounds)
.JPG?width=960&height=720&fit=bounds)
Snatch Block - Heavy Duty Light-Weight Aluminum | Tactical Recovery Equipment
Snatch Block - Heavy Duty Light-Weight Aluminum. Lightest Snatch Block for Synthetic Winch Rope up to 7/16". Off Road Use Only.
www.tacticalrecoveryequipment.com
Saved a bunch of weight going to this style.
67cj5
Man On a Mission
I have to say I possess 3 snatch blocks and have been fortunate to only have used them a couple of times. The warns are a semi-permanent loan from a family member.
Winch Snatch Block, 20000 lb - 88899
www.warn.comI keep this one saved in my eBay account just in case I ever need or want another. It does not have any country markings but it is identical to the warn above other than being galvanized. I don't know if it is a clone or built at the same factory but it has worked for me.Winch Snatch Block - 24,000 lb Capacity
www.warn.com
Snatch Block, Yarding Block Wire Rope Cable Pulley for 4.5 Tons - 5" | eBay
This Snatch Block, Yarding Block Wire Rope Cable Pulley is designed for use in lifting machines, pulleys, and rigging. It is made by the brand Hy-Weld and is suitable for handling up to 4.5 tons of weight. The block measures 5 inches and is ideal for use with wire ropes and cables. This...www.ebay.com
I bought one of those Red Warn 4.5T Blocks about 20 years ago, they are really well thought out and I also have one of their flat snatch blocks, As a non American I do like buying American products but I have others from else where too.
I have to say I possess 3 snatch blocks and have been fortunate to only have used them a couple of times. The warns are a semi-permanent loan from a family member.
Winch Snatch Block, 20000 lb - 88899
www.warn.comI keep this one saved in my eBay account just in case I ever need or want another. It does not have any country markings but it is identical to the warn above other than being galvanized. I don't know if it is a clone or built at the same factory but it has worked for me.Winch Snatch Block - 24,000 lb Capacity
www.warn.com
Snatch Block, Yarding Block Wire Rope Cable Pulley for 4.5 Tons - 5" | eBay
This Snatch Block, Yarding Block Wire Rope Cable Pulley is designed for use in lifting machines, pulleys, and rigging. It is made by the brand Hy-Weld and is suitable for handling up to 4.5 tons of weight. The block measures 5 inches and is ideal for use with wire ropes and cables. This...www.ebay.com
Just want to say that I am in need of a larger snatch block, placed and received a snatch block which I am not happy with. While researching this issue, I stumbled onto this post. The images shown in the second two links in the above post, match the images for a Chinese manufacturer known as JOYO. If you look at the images on the two websites, you will see that the snatch blocks are marked with WLL values which are much less than what the info on stated on the sellers websites are rating these at.
Here is my experience: Personally, I recently ordered and received a snatch block advertised as rated for 30,000 lbs. When I received the order, I received an item identical to what is shown in the first link above, cast into the item was "WLL 4-1/2 tons", so 9,000 lbs.
I found what appears to be the manufacturer's website: https://www.globalsources.com/Pulley-block/block-pulley-block-snatch-block-1185800298p.htm
If you look at the website I posted above, these are being offered with pulley diameters from 3" to 8" at prices ranging from US $ 3.50 to $4.00 each with a minimum order of 10 pieces. Mine came with a 5 pulley and a marked WLL of 4-1/2 tons. The vendor I ordered from rated it at 30,000 lbs.
Do you think you want to be standing near, or be responsible for others standing near a cable under load and connected to a $4.00 snatch block? I think not.
I ordered from what I thought was a reputable and trustworthy company, and was totally surprised that I have encountered this issue. Now I find other companies which I have great respect for are also offering these with similar exaggerated ratings.
I have requested a return authorization for my order.
Be careful.
I have to say I possess 3 snatch blocks and have been fortunate to only have used them a couple of times. The warns are a semi-permanent loan from a family member.
Winch Snatch Block, 20000 lb - 88899
www.warn.comI keep this one saved in my eBay account just in case I ever need or want another. It does not have any country markings but it is identical to the warn above other than being galvanized. I don't know if it is a clone or built at the same factory but it has worked for me.Winch Snatch Block - 24,000 lb Capacity
www.warn.com
Snatch Block, Yarding Block Wire Rope Cable Pulley for 4.5 Tons - 5" | eBay
This Snatch Block, Yarding Block Wire Rope Cable Pulley is designed for use in lifting machines, pulleys, and rigging. It is made by the brand Hy-Weld and is suitable for handling up to 4.5 tons of weight. The block measures 5 inches and is ideal for use with wire ropes and cables. This...www.ebay.com
I have to say I possess 3 snatch blocks and have been fortunate to only have used them a couple of times. The warns are a semi-permanent loan from a family member.
Winch Snatch Block, 20000 lb - 88899
www.warn.comI keep this one saved in my eBay account just in case I ever need or want another. It does not have any country markings but it is identical to the warn above other than being galvanized. I don't know if it is a clone or built at the same factory but it has worked for me.Winch Snatch Block - 24,000 lb Capacity
www.warn.com
Snatch Block, Yarding Block Wire Rope Cable Pulley for 4.5 Tons - 5" | eBay
This Snatch Block, Yarding Block Wire Rope Cable Pulley is designed for use in lifting machines, pulleys, and rigging. It is made by the brand Hy-Weld and is suitable for handling up to 4.5 tons of weight. The block measures 5 inches and is ideal for use with wire ropes and cables. This...www.ebay.com
Hillbilly Heaven
Explorer
What happens is a confusion between Max Breaking Strength and Work Limit Load. MBS is usually 3 to 3.5 times WLL. Vendors trap buyers by posting MBS and not saying that is what it is. So buyer has no idea if the rating is MBS or WLL.
I totally agree with that. However sometimes I think that whom ever creates the description is not technically qualified.