Looking for air compressor input
- Thread starter gkieser92
- Start date
Alloy
Well-known member
Off the pavement I'm in 4x4 for traction and control. Sometime I'll air down to improve the ride but not always.
The exception is on shale, fractured or blasted rock. On these roads I never air (70psi) down the 3,400lb tires on the truck. I air up the 1700lb tires to (45psi) on our Subaru past max (40psi) recommend to expose less sidewall. With the Subaru I stay away from the sides of the road where the larger stones are.
I'm running tandem Viair (old model) 300C. Bought the dual pack on sale at 40% off. This gave me redundancy for less than the cost of the better built compressors.
The exception is on shale, fractured or blasted rock. On these roads I never air (70psi) down the 3,400lb tires on the truck. I air up the 1700lb tires to (45psi) on our Subaru past max (40psi) recommend to expose less sidewall. With the Subaru I stay away from the sides of the road where the larger stones are.
I'm running tandem Viair (old model) 300C. Bought the dual pack on sale at 40% off. This gave me redundancy for less than the cost of the better built compressors.
Alloy
Well-known member
Have you tied to breath through one of those air silencers. This is what I have on my compressors....filters cost me $4 a year though : )
DaveInDenver
Middle Income Semi-Redneck
That's a sweet filter. I know I should do something better than running an air muffler as an intake filter. Just what I had in the junk box to replace the original plastic and foam job. I had a couple of those sintered mufflers from a previous axle breather project and they were 1/8NPT ready to go.
Similar threads
