looking for info on a fixed position tire carrier

[Jevy]

Hey everyone,

I have a DIY JCR rear bumper installed on my 1984 Jeep CJ7 :

Seeing as how I have a fiberglass tub (no tailgate on the rear). I'm wanting to put a tire carrier on it and the ability to haul a couple rotopax fuel containers and a hi lift jack. Just curious for ideas and peoples set ups. I'm not particularly worried about blocking the tail lights because they will likely be replaced with some flush mounted LED's. Any pics or info would be appreciated. I put this post here instead of the Jeep forum because this can be relevant to about all models pickups etc. Just looking for some ideas. Thanks.

 

[Melody]

from http://www.saferwholesale.com/Jeep-Tire-Carrier-Kit-p/jeep tire carrier kit.htm

If you don't need to get in the back of your jeep, you can just weld something directly to your bumper without a hinge.

 

[Jevy]

thanks for the pic. I'm having a hard time visualizing how hard it will be to have access to the high lift and rotopax carriers. I expect to rarely need either but would still like it to go on/off rather easily if possible. Guess I just need to get out there with some tubing and tack weld up a few options.