M101A2 Leaf Spring Replacement

[cs0430]

Noticed that the ends to two of my leaf springs are broken (see third leaf from the top in picture). I see dexter sells some 3500lb springs, but the price point makes them seem too good to be true. They would only be $140 or so compared to $600+ for a new set of custom leaf springs. I will be ordering a dexter axle for the trailer.

Has anyone replaced their leaf pack? What did you use?

 

[gunbunny]

Saturn Surplus has new springs for the M101A2- http://www.saturnsurplus.com/trailer/trailer.htm
I bought a pair and they were new, just weathered a little bit by sitting outside, and still fully painted.

 

[Mark Harley]

They are not broken.
My 1990 M101A2 has the same flat ends at the wrap.
Both sides and both ends.
The shorter leafs are angle cut though.

 

[cs0430]

They are not broken.
My 1990 M101A2 has the same flat ends at the wrap.
Both sides and both ends.
The shorter leafs are angle cut though.

Best news of the day! Thanks Mark!

 

[Mark Harley]

You are welcome!

 

[micoinde]

Where may I purchase replacement leaf springs for my M101A2 near or in the Delaware area? I discovered the right-side leaf spring to be sagging.