Time to get the upper lights wired up.
Setting up the wiring harness for the lights and installing the pins for the electrical connectors.
I used a marine through deck fitting to feed the wiring through the cab and ensure a waterproof seal. The wire is 6 conductor.
Wiring running up to the rack is hidden behind the cover plate along the pillar.
Light!!
Installing a Blue Sea dual USB charger.
Hole drilled in the knee pad under the dash.
And installed
And with the engine cool this morning I decided it was time to check the valve clearance. The intake valves were all good with only a couple slightly snug. Two of the exhaust valves were tight and the rest were right on the money. Good to go for a while now.
More to come soon...
Hodakaguy