D2 Engine Rebuild Part 2
Once again, it has been quite awhile since I have updated about my project of getting a stock D2 sorted. I rebuilt the engine for a second time, using a different machine shop. I had the heads milled flat and a valve job done. The block deck was milled flat this time (the last shop just used a sanding block and it was not flat). I put in a Crower '229 cam and new lifters from D&D Machining in. I rebuild the rocker arms and rails. All new bearings and gaskets. So on and so forth. This time, the truck is running great with no issues. I have logged a little over 500 miles in the 3 weeks since I finished it. I guess this is where the thread should have actually began. At this point, I have the most money sunk into a stock D2 of anyone I know. What would it hurt to keep throwing money at it for improvements?:sombrero: