frumpy
Explorer
Well I got rid of my rusted out YJ so here is my new project. Its already "built" but needs some work
What she came with
- Dana 30/44a
- 4.56s
- oba, CO2, and compressor
- tube rockers
- 6" BDS short arm lift (mix match of part I think but BDS springs and shocks) - sketchy welded in coil buckets to give an extra 2-3" of lift (will be coming out hopefully)
- BFG 35x12.5 MTs on crappy rims
How it looked when I brought it home.
Then I sold the 35" BFG MTs on stock (I think) rims and put my 33x13.5" LTBs and bead locks on.
So here's what it needs (previous owner who I knew through work said it only needed a windshield and alignment for inspection. I had a feeling it might need a bit more)
new steering box
front spider gears
engine mounts
2 ball joints
transmission mount
front track bar and bracket
rear track bar and bracket (have but not installed)
exhaust manifold
spacers removed
after doing a bit of thinking and lot of reading I am starting to lean towards an expo build, which wasn't my original plan. I like camping and haven't done a lot of wheeling in due to limited space due to owning a YJ which was towed to the trails (and I didn't own a roof or doors). Although it won't be anything crazy I plan on setting up for 2-4 day trips but also want to be able to hit the harder trails.
After I get the above problems fixed I plan on long arms, rear storage/sleeping platform, front receiver (have a winch sitting in my basement), and roof rack if needed for the lighter stuff that wont fit inside.
What she came with
- Dana 30/44a
- 4.56s
- oba, CO2, and compressor
- tube rockers
- 6" BDS short arm lift (mix match of part I think but BDS springs and shocks) - sketchy welded in coil buckets to give an extra 2-3" of lift (will be coming out hopefully)
- BFG 35x12.5 MTs on crappy rims
How it looked when I brought it home.
Then I sold the 35" BFG MTs on stock (I think) rims and put my 33x13.5" LTBs and bead locks on.
So here's what it needs (previous owner who I knew through work said it only needed a windshield and alignment for inspection. I had a feeling it might need a bit more)
new steering box
front spider gears
engine mounts
2 ball joints
transmission mount
front track bar and bracket
rear track bar and bracket (have but not installed)
exhaust manifold
spacers removed
after doing a bit of thinking and lot of reading I am starting to lean towards an expo build, which wasn't my original plan. I like camping and haven't done a lot of wheeling in due to limited space due to owning a YJ which was towed to the trails (and I didn't own a roof or doors). Although it won't be anything crazy I plan on setting up for 2-4 day trips but also want to be able to hit the harder trails.
After I get the above problems fixed I plan on long arms, rear storage/sleeping platform, front receiver (have a winch sitting in my basement), and roof rack if needed for the lighter stuff that wont fit inside.