New - Toyota 9.5" 4.88 Gears

[nitro-gear]

New - Toyota 9.5" 4.88 Gears

Nitro's new Toyota 9.5" rear 4.88 ratio gear supersede part number TLC100-488-NG. The previous TLC100 gears had a 29 spline pinion, our T9.5 gears are 32 spline. Older models can now upgrade to these gears with our conversion yoke YOKT60060 and Master Install Kit MKT9.5, for a pinion spline upgrade.

Toyota 9.5", 98+ Land Cruiser, 70, 100, 105, 200 Series & Autana Rear, 4.88 Ratio, Nitro Ring & Pinion​

Vehicle Applications:
**1998-2007 models will require yoke YOKT60060 and Install Kit MKT9.5**


Rear Diff:
1998-2007 Land Cruiser 100 Series, HDJ100, HZJ105, FZJ100, FZJ105, UZJ100
1998-2007 Land Cruiser Burbuja & Autana (Venezuela)
1998-2007 Land Cruiser 70 Series
(matching front gear T8R-488R-NG)


2008 & Newer Land Cruiser 70 Series
(matching front gear T8R-488R-NG)


2007-2014 Tundra w/ 4.6L 1UR-FE or 4.7 2UZ-FE
2008 & Newer Land Cruiser 200 Series, GRJ200 URJ200 VDJ200
(matching front gear T9R-488-NG


Also available in complete 4x4 Gear Package Kits with front and rear ring & pinions and front & rear master install kits:

GPTOY100-4.88-1 GPTOY100-4.88-2 GPTOY200-4.88​

Features:

• 2 Year Warranty*
• 32 spline pinion upgrade for 1998-2007 models
• 8620 gear forging
• Precision machined
• Triple lapped
• Rockwell hardness tested

Tech Note:
32 spline pinion, is a direct fit for 2008 Models, is an Upgrade for 1998-2007 vehicles, which will require YOKT60060 & MKT9.5, see Vehicle Application tab for more info

 

[reznunt]

So for a 98 LC w/ factory rear locker I'll need GPTOY100-4.88-2 and YOKT60060? Thanks

 

[bjowett]

About time!:ylsmoke:

 

[Letsgomoreplaces]

Gear package 100 series

The gear package includes the rear YOKT60060 yoke since it is required for 100 series. You will need the YOKT35100-
http://www.justdifferentials.com/GPTOY100-4-88-2-p/gptoy100-4.88-2.htm



Gear Package Kit Includes:
Nitro front ring & pinion
Nitro front Master Install Kit
Nitro rear ring & pinion
Nitro rear Master Install Kit
front pinion pre-load spacer
Rear pinion pre-load spacer
Rear Pinion Yoke

Tech Note:
1998-2002 100 Series Land Cruiser's require a 29 spline front YOKT35100-MULTI

So for a 98 LC w/ factory rear locker I'll need GPTOY100-4.88-2 and YOKT60060? Thanks