Here it is all buttoned up with about 6 hours invested.
Here is the difference between the stock front spring cushion and the ACOS
The rear was easy simply a parts swap.
Be sure you trim the rear bumper bolt where it protrudes through the spring box so you don't end up with a clunking noise over bumps.
The rear shackles added about 1.5" to the rear height
The Front ACOS system added about 1.75" to the front height but due to saggy front OEM springs I ended up with Jeep with a slight rake forward .
I have my front OME springs but my rear OME leafs are still in transit. so I wasn't able to install them at the same time.
Because the lift was under 2" and I'm not going off road soon I am still on stock JK shocks but I will be doing some research to see what will fit my needs in the realm of dampening.