ORM - Off Road Miata

Questor

Huge member
As we age and go though life, we go through different phases, trying new things, and hopefully learning along the way...
From Adventure Bikes, to Tacomas, to full sized Expedition Vehicles, we learn the strengths and weaknesses of each and incorporate that into our sphere of knowledge.

And then you start to dream and wonder, and plan, and rationalize...
I want the speed and visceral experience of a motorcycle, with the climate control of a tacoma, and a kitchen.

The next thing you know, you've gone and done something... weird.
May I present, the Off-Road Miata!
20250305_102940.jpg

I love riding the twisty roads in the Appalachian mountains. Its one of the reasons I moved here.
The Nantahala National Forest and others contain thousands of miles of narrow dirt roads, which are a delightful combination of scenic views and hidden waterfalls.

But I got tired of riding in the rainforest climate of the Western Carolinas. In the summer we get a big thunderstorm pretty much every evening. I got tired of riding in the rain, soaked from the humidity and wanted more storage space.
So a convertible sports car seemed to be the optimal solution, till I got to my first dirt roads...

So I hatched a plan to make a sports car more dirt road capable.
First, we need bigger tires and lift to fit them.
27"x8.5" on a stock 14" rim works and there are some good Mud Terrain tires available in that size. There cheap too! About $120 / ea.
Then we needed a lift and new suspension. Through the internet, I discovered Paco Moto. They sell a suspension kit with moderate long travel, and coilovers so I could set the height.

Then we got to work.
20241113_094621.jpg

With a lot of fender cutting, a bunch of new holes in the trunk, we were able to get things to fit with minimal rubbing.
Front fender.
20241113_094820.jpg

Rear fender.
20241113_095138.jpg

Then let's see if we can get a neutral stance out of the suspension.
20241113_104551.jpg

We were able to get a good alignment and I spent the next two months testing and tuning the suspension. Sure we could have lifted it all the way for maximum clearance, but that would be hard on the rear axles. I wanted good handling on moderate dirt roads. I knew I would never be rock crawing with this.... or will I?

But for the majority of the dirt roads I'll be driving I think I've found a good compromise.
 
Last edited:

Questor

Huge member
Once I was satisfied that this would be a good / fun / functional vehicle I got to work on the kitchen in the trunk.
More cutting. Ditch the spare tire. A bunch of pounding with a 8lb sledgehammer.
Now we have space to work with!
I made a template for the battery tray cover, fitted it, and then had a plate made in metal.
20250313_104452.jpg

The plan is to fit a Goal Zero 400 in the right rear fender to power the fridge, wich in turn will be powered by the Miata's alternator.
20250313_145343.jpg

Then just some additional tie down points and we can strap down a fridge in the spare tire area.
20250313_173124.jpg

I still have some space for camping gear. To me this is like luxury motorcycle camping. I can even bring a small wood stove for evening campfires.

The Goal Zero should easily run this fridge for 12-14 hours between charging up.
I can also unfold 50 watts of solar panels.

So that's where we are in terms of the vehicle.
I hope to start doing overnight trips once the night time temperatures warm up.

Q~
 

Questor

Huge member
Neither do I really!
It's amazing what you can do with basic Ryobi 18v tools...

I bought the car for a couple thousand dollars. I figured, how badly can I screw it up?

The University of YouTube is an amazing place to learn.
Then start asking questions...

I'd really like a class 11 VW bug, but those are not common on the East Coast.
I looked at them seriously when I lived in CA.
 

Questor

Huge member
So what else have we done to the ORM?
Well, the interior was really beat up, with some water damage.

I replaced the soft top with a heavy duty vinyl one.
Then I could do something about the seats... like just get rid of them. They were falling apart and offered no support.
Out with the old ones.
20250317_130129.jpg

In with the new leather ones from an 02. They bolt right in and just fit under roll bar.
20250317_155353.jpg
Much better. Maybe someone will want to go for a ride some day...

Q~
 

Questor

Huge member
Then I had to do something about the gaping hole in the dash where the radio used to be.
My solution was to use a sheet of 1/8" HDPE plastic to mount into the opening, and then add the GPS mount and auxiliary light switches.
It came out pretty good I think.
20250321_184222.jpg
The Garmin unit can be removed just like on a motorcycle.
Q~
 
Last edited:

casioqv

Dr. Diesel
Really cool build! I think a lightweight convertible sports car can make a very capable offroad vehicle- the low weight and low center of gravity are really helpful. I keep thinking about doing something similar to my Boxster.
 

BritKLR

Kapitis Indagatoris
Brilliant!

Well done....I have dirty thoughts about "rallyizing" my TR-6. Slight lift, fender flares, BFG A/T's in steelies and Lucas lights up front.

Maybe one day.
 

Questor

Huge member
So I've had this vehicle built for about two months, and it turns out to be very adept at moderately difficult roads.
As others have stated the light weight, wide stance, long suspension travel and Torsend rear axle gives this vehicle the ability to get traction and climb some pretty impressive roads. No, it's not a fully locked 4x4, but for 80% of the roads I want to drive, it handles very nicely.

UPDATE: This week I'm taking off and will drive the SCAR (South Carolina Adventure Route). The ORM is all packed and the GPS is loaded with routes. I'll start in Brevard and drive clockwise. If I go slow, this should take 7 to 10 days. Let's see what we see!

Maybe I'll see you out there.
20250413_135346.jpg

Q~
 

Forum statistics

Threads
189,015
Messages
2,911,963
Members
231,545
Latest member
JPT4648
Top