P38 trans swap into D1??

[franko]

I found a P38 with low low KM on it. Would like to swap this trans into my 95 D1,is this possible?
I know the p38 has the Borg waner t-case, so can I just swap out the output flanges??
Looking for some to point me in the right direction.
Thanks

 

[JSBriggs]

Isnt the P38 ZF computer controlled like the D2 one?

-Jeff

 

[94Discovery]

Cannot confirm but I heared that you can change the valve block from the disco and install,it on the p38 but the tcase is different

 

[R-Overland]

I heard that , too. but after making a phone call , I was told that you have to exchange the governor , too
Best would be to use a ZF22 body and bolt it to the ZF24 bell housing and turbo shaft assembly

 

[UnfrozenCaveman]

Pardon me gents...but the P38 diffs are on the "wrong" side.

 

[R-Overland]

You will have to use your LT230 to make it work

 

[Fivespddisco]

I think the way it bolts to the Borg box is different then the d2 to the lt 230.