Partner stove windscreen fix
- Thread starter slowtwitch
- Start date
DirtWhiskey
Western Dirt Rat
You got my attention. Tell me more.
slowtwitch
Adventurer
MiamiC70... totally agree.
DW, not much to tell. Just came up with a better mousetrap, got some ss rod from Mcmaster and bent it up.
DW, not much to tell. Just came up with a better mousetrap, got some ss rod from Mcmaster and bent it up.
DirtWhiskey
Western Dirt Rat
Well done I will try to emulate. Did you to the squigglies by hand or make some sort of jig?
slowtwitch
Adventurer
I did both... by hand was no good, so I made a jig.
robertofran
New member
Well done!
Can you share a pic of your jig?
Can you share a pic of your jig?
slowtwitch
Adventurer
Here you go..
MiamiC70
Well-known member
I think it’s time to slap “Overland” and start selling those just make sure it’s a stupid high markup. Also, DuraCoat a few slap “Tactical“ in the name and mark those up even higher.
DirtWhiskey
Western Dirt Rat
Um certain folks would pay way too much to compensate you for your hard work! Ahem.. Great work on that jig.
slowtwitch
Adventurer
I would need to charge something silly like 25$. The ss rod is not cheap.
DirtWhiskey
Western Dirt Rat
$25 is a bargain compared to me making all that great tooling etc. Seems fair for a custom mod like this.
Old Tanker
Active member
Offer them on Etsy or Ebay and see what happens. $25 isn't silly - you did the tooling.
slowtwitch
Adventurer
Maybe I should send it to Partner.?
To be fair my little jig does nothing Partner cant already do. The 90 degree bend that goes into stove base, and the 180 bend were done by hand. Couple extra inches and a 180 bend and Partner could adjust their design easy.
To be fair my little jig does nothing Partner cant already do. The 90 degree bend that goes into stove base, and the 180 bend were done by hand. Couple extra inches and a 180 bend and Partner could adjust their design easy.
Last edited: