Post Van Parts For Sale Here please

[vintageracer]

I have a 1996 Dodge Sportsmobile that has a couple of damaged cabinets that I would like to replace.

Before I tear out and begin rebuilding the original damaged cabinets I would like to see if anyone here on the board has any cabinets they might have removed from their Ford, GM or Dodge Sportsmobile during a rebuild or upgrade.

I need the passenger side (Curb Side) sink/range cook-top cabinet that mounts forward of the rear closet/refrigerator cabinet depending upon floor pan and a driver's side (road side) rear closet or refrigerator cabinet that mounts at the rear of the van behind the fold out chair/bed.

Would like these cabinets to be within reasonable driving distance of Nashville TN.

I know this is a long shot HOWEVER I might as well give it a short shot!

Telephone contact is best if possible at 6won5+347_7459

I look forward to hearing from you!

 

[mgmetalworks]

^^^^^ Still have the tank. need it outta here. Make me a reasonable offer via pm or email info@expovans.com. This was only in the van for a couple thousand miles before it got to my shop. Comes with all of the brackets and hardware. I can show you how to make this work in an older van too.

Bump.

Let's make a deal!

 

[Jsweezy]

I have a bench seat setup out of a tahoe/yukon for sale. Tan Leather, mounted to frame using factory mounting points on seats and all welded together. Folds flat.

Located in Hillsboro, OR. Asking $500.00



https://portland.craigslist.org/wsc/pts/6789367617.html

Thanks,
Josh

 

[Pinnacle Campers]

I have a "cut down" 2006 E350 OEM tank for sale.
This was shortened using the ujoint kit by a local shop.
Local sale would be preferred, cost of freight shipping might make it not worth it.
Comes with extra straps, and fuel pump hanger assembly with an assumed bad fuel pump.
Does $250 seem fair?
Anyone is Boise planning to install a transfer case and need a short tank?

I have a MG metalworks 4x4 kit for sale.
PM for details, edit: $2250 plus shipping!

The MG metalworks kit is the easiest and most inexpensive way to put a 2005 and up Ford F250/350 front (D60) drive axle in a 92 and up Ford E series van.

Just bumping these up,
I also have the following,
Driver side rear window glass, two with two different tints
Fixed rear door glass, tinted

 

[akskiffer]

benches(not too special), rear headliner and rear interior panels from '09
Renogy z mounts and 8'tray cables new

 

[North]

^^^messaged you about panels

 

[bbbthreat]

Have an OEM Chevy Express 3500 transmission cooler at 8000 miles. Undersized for actual needs and replaced with a larger Tru-Cool unit. This would work perfect as a power steering fluid cooler.

Free to a good home.

Located north of Santa Barbara, CA.

 

[mgmetalworks]

Still have the tank. need it outta here. Make me a reasonable offer via pm or email info@expovans.com. This was only in the van for a couple thousand miles before it got to my shop. Comes with all of the brackets and hardware. I can show you how to make this work in an older van too.

 

[hoptroll]

Selling an RB Components 76" rollover couch with a deep storage box. Believe I have the legs for the couch as well if the box is not used. Both are in good condition with minor wear. Would be perfect for a FWC or van. Came out of a sprinter. Im in the Bay Area, Ca.
$650 OBO LOCAL PICKUP ONLY.

https://rbcomponents.com/collections/sofa-sleeper/products/sofa-sleeper-76-black-vinyl-1
https://rbcomponents.com/collection...roducts/folding-sofa-storage-box-deep-76-sofa

 

[Pinnacle Campers]

I have a MG metalworks 4x4 kit for sale.
PM for details

The MG metalworks kit is the easiest and most inexpensive way to put a 2005 and up Ford F250/350 front (D60) drive axle in a 92 and up Ford E series van.

I have less than 20 hours into removal and install of a mostly complete 2015 front axle using this kit. Phase 1 done!
There are bracket kits are ready to ship.

 

[Rocksrus]

I'm stripping a 1988 E-150 I bought as a manual transmission donor. All parts unrelated to my driveline swap are available. Door hinges, gauges, lights, blower motor, body panels, etc. Contact me for anything you need and I'll make you a BARGAIN. Want to see stuff get used instead of being scrapped.

I have a 1988 as well what interior parts do u have need window plastic covers

 

[Mwilliamshs]

I have a 1988 as well what interior parts do u have need window plastic covers

Got a pic of the part you need or where it fits?

 

[Rocksrus]

Got a pic of the part you need or where it fits?

Will get them

 

[hoptroll]

OEM Mercedes roof rack for sprinter 07+
Bay Area
$250

 

[PhillySMB]

WTB: Your 2008+ Ford E250 or E350 2WD front suspension and brake take-off parts! If you're converting to 4x4 and have the complete front-end parts in very good condition with lowish miles, let me know. I'm in the Philadelphia area but am willing to travel within a day's drive. Also interested in OEM Ford 16" aluminum mag-style or Alcoa wheels to fit 8x6.5. Looking to upgrade my 2002 E250 to the newer-style brakes, etc.