Post Van Parts For Sale Here please

[Imbecile]

Yes he quoted me a price for the case and adapter, just waiting on a couple of better pictures.

 

[blakeape]

I just added pictures in the posting in the classified section. I’ll take $450 plus shipping on the adapter and t case.
thanks
Jake.
406 two four nine 8817

 

[b. rock]

Professionally removed Ford EB high top, a la shuttle top style, presumably vintage 2006. If you're 5'8" and below you should have standing height, which puts it at a 16"-18" top. My wife is 5'10" and it was just too short for her to stand, as a reference. If someone can tell me where the 'official' height of a top gets measured, I can pull a tape and measure it but 16"-18" is the range I see walking around it. Edit: this is a reverse flange top, and is bare fiberglass on the other side.

Comes with pre-installed fantastic fan, plus the controls.

Small hole drilled right above the cab area - maybe for an antenna? Not sure, was there when we got the van. Otherwise no leaks/cracks/etc.

Located in Evergreen, CO.

Not 100% what these go for, especially with the fan already installed, so let's start at $1500 OBO with you picking it up. If I have to deliver it along the front range, let's chat as I'd have to rent a trailer.

For what it's worth I picked it up from Timberline using a U-Haul car trailer - it straddles the open center just fine.

 

[justbecause]

We are going to look at an 01 e350 on Friday in KY.
If anyone in North Alabama, Tennessee, or near/around somerset KY has a 2nd or 3rd row seat we are interested, we will also need to replace the rear tires before heading home. If anyone has a 1/2 way decent set of wheels/tires I would be interested in picking those up vs buying some temporary tires and having to wait for them to get mounted and balanced.

 

[Byzantine51]

Gaucho style bench/conversion sleeper. Removed from a Ford E-series van. DoT approved, includes mounting hardware. 59”W x 18”H x 40”D as bed. Vinyl upholstery in good, used condition, no tears or burns but some discolored spots. Can for scale, not included. Located in CB South, Colorado. Delivery to CB, Mt. CB or Gunnison possible but local pickup preferred. $300 obo.

 

[b jeepin]

I have a class b coachman hi top available, I have listed in vehicle parts of anyone’s intereste?

 

[MadMax321]

Econoline hood and grill $100 OBO Grill is about a year old. Hood is off a 2000, had a decal in the center that I removed but can kind of still see it depending on the light. I’ll pressure wash the Idaho bug juice off.
In Boise, not shipping.

 

[Neilg]

Edit: Sold the 30 amp Camco power cord.

Still have the Maxxair 4000K roof fan. Brand new, never installed. (Went with the remote control version...). $100.


I'm in Las Vegas, NV. Local pickup is preferred but I'll ship this stuff if you can pay shipping.

 

[b jeepin]

Bump, and open to an offer. Be nice to get it to a new home before snow flys

 

[dgregorycope]

Hello. I'm selling part of a Weldtec Baja Grocery Getter lift kit. Long story short-- I had the entire kit installed in 2019. Some ************** smashed into me a few months later and I had to replace the Ibeam and radius arm on the drivers side. So I have a bent Ibeam and radius arm for the passenger side available. In the pics you can see the damaged parts that had to be replaced. Asking $500 for both. In LA near Dodger Stadium.

 

[snowgroomer]

U Joint 35 gallon fuel tank to fit 4wd van was installed in 2006 v10 complete with fuel pump local pickup in VT $500

 

[Vandiesel]

All my takeoff items from my big brake upgrade. Dynatrac steering knuckles, Moog ball joints, brakes pads and rotors all in really good shape, worn HD locking hubs. All came off my Dynatrac Dana 60 from my 2006 sportsmobile. Also vacuum booster and brake lines. Not sure what they are worth. Look worse in pics as it’s surface rust from being in the rain during the install. All the brakes and ball joints have less than 15k on them.


Sent from my iPhone using Tapatalk

 

[Justgosurfin]

All my takeoff items from my big brake upgrade. Dynatrac steering knuckles, Moog ball joints, brakes pads and rotors all in really good shape, worn HD locking hubs. All came off my Dynatrac Dana 60 from my 2006 sportsmobile. Also vacuum booster and brake lines. Not sure what they are worth. Look worse in pics as it’s surface rust from being in the rain during the install. All the brakes and ball joints have less than 15k on them.


Sent from my iPhone using Tapatalk

What brakes did you go with?


Sent from my iPhone using Tapatalk

 

[Vandiesel]

I used 2008 ford oem. I’d use the ssbc if I could do it over.


Sent from my iPhone using Tapatalk

 

[Justgosurfin]

I used 2008 ford oem. I’d use the ssbc if I could do it over.


Sent from my iPhone using Tapatalk

Gotcha. What size wheels are needed for that? I did a hydro boost swap but would love some bigger discs/calipers


Sent from my iPhone using Tapatalk