Propane piping

Teardropper

Well-known member
Sorry, I meant bulkhead fittings. How are you getting the propane from the outside to the inside?

Ooops. "My bad."

Here's my gorgeous little Propex heater. (With 180º heat coming into the cabin, it is truly gorgeous when its cold.)

ZBxOTW5.jpg


The 1/4" pipe goes down and has an elbow that faces forward underneath and of course, the hose is hooked to it. The hole is sealed with polyurethane sealant.

Tony
 

Alloy

Well-known member
Ooops. "My bad."

Here's my gorgeous little Propex heater. (With 180º heat coming into the cabin, it is truly gorgeous when its cold.)

ZBxOTW5.jpg


The 1/4" pipe goes down and has an elbow that faces forward underneath and of course, the hose is hooked to it. The hole is sealed with polyurethane sealant.

Tony
Allways best to stick with all brass or black pipe. With galvanized pipe there a chance of galvanic reaction and zinc flaking, plugging up the jet.
 

Forum statistics

Threads
189,922
Messages
2,922,228
Members
233,083
Latest member
Off Road Vagabond
Top