R50 Pathfinder - mild build

[wreckdiver1321]

You've got a nicely equipped Pathy.

Pretty sure those lines on top of your rear view screen are supposed to be on the ground to indicate distances. Upside-down camera?

If the camera was upside down, I'd imagine the image would be upside down as well.

 

[DD196]

Yeah, odd. Our 14 RAV has the lines on the ground with no option to move them. An recent Altima rental had them on the ground, my daughter's CX-5 has them on the ground, sister's new Impala has them on the ground...?? Maybe add-on rear view cams have options.

 

[East Coast Overland]

Can you post the wheel and tire specs? With my bumpers should fit 33's easy but need backspacing info.

Thanks, tires are 33x12.5 R15 and rims are 15x8 with 3.75 BB. That's the key right there!

 

[East Coast Overland]

You've got a nicely equipped Pathy.

Pretty sure those lines on top of your rear view screen are supposed to be on the ground to indicate distances. Upside-down camera?

Thanks, yes the guide lines are upside down as my camera is mounted on the roof rack upside down. I do have the option the rotate the image itself but unfortunately the lines don't move and I can't turn them off either. It's just a simple aftermarket camera.

Since it's on the roof the guide lines wouldn't match up anyways so it's better they are out of the way. It's just so I don't run into anything when I back up as the spare blocks my rear view window.

 

[East Coast Overland]

Haven't really kept this thread as up to date as my other on Pathy forum so here are a few extra pics.

Interior LED conversion

 

[East Coast Overland]

 

[XPLORx4]

CDN_S4, what's that you've got on your transmission shifter?

 

[East Coast Overland]

That's just a Garmin GPS for military grids. It's the kind you can wear on your wrist.

 

[East Coast Overland]

Got rake?! Lol

 

[Dmski]

Excellent build! I was wondering if you have plans for sliders or bumpers or if you will be leaving it as is?

 

[East Coast Overland]

Yes I will be building a rear bumper that will integrate my tire and jerry can carrier. I will also build a custom front bumper, much like a JK bumper. I would like sliders but all the additional weight is starting to become a concern for this little 3.3L.

 

[East Coast Overland]

Now sitting on front and back OME springs and 2" spacers. Up next, SFD, front bumper and winch.

 

[East Coast Overland]

Bumper and winch are on. Took quite some fabricating to make it fit. But it's all done and it came out real nice.

 

[RG5384]

Looks GREAT!

 

[East Coast Overland]

Thanks.
Some action shots