So I did same to mine, then removed the factory tie downs so I could mount a small platform to hold me fridge (on slide) and case for gear (holds 4 soft woof packs). Bought longer bolts to hold down platform, which was lifted I think 2-3”. I have a nice gap, which allows me to hide 4 chairs, a roll up table and still easily get at spare if needed. I can see out the back with the seats up and not have restricted view which since it is my DD was important.
Ive never missed the 3rd row though I must use use my roof rack more often ... too bad.
Here are closeups of the platform install. Used 3/4 plywood for base which bows. Thinking about putting a removable block under there. This was my 2nd cabinet, this design allows me to keep platform and change the box if needed or I come up with a chuck box or something else.
![81586A49-4AD7-43CE-919A-35561A757BD4.jpg 81586A49-4AD7-43CE-919A-35561A757BD4.jpg](https://expeditionportal.com/forum/data/attachments/335/335632-d32c1779e93f98d1528b264fc8027548.jpg)