wjeeper
Active member
Both! (That's if my guess is a clevis to go on the centerlink to convert the tie-rods to heims is right)
Road to SEMA, A 90 day build ROUND 2
- Thread starter Weldtec Designs
- Start date
Both! (That's if my guess is a clevis to go on the centerlink to convert the tie-rods to heims is right)
REDOVAL
Adventurer
Teaser shot of the Vantage Optics projector retrofit headlight build for this van. This is just after the lens was removed.....stay tuned for more photos as the build and design is finalized! These will be available for sale on the site soon.
www.vantageoptics.com
Scott Thompson
Vantage Optics
vantageoptics@gmail.com
424-250-0270
www.vantageoptics.com
Scott Thompson
Vantage Optics
vantageoptics@gmail.com
424-250-0270
Weldtec Designs
Supporting Sponsor
Chevy 4x4 van suspension & steering
How about this for a sneak peak and the answer for the above part! If you own a Chevrolet van these will be available very soon.
We are also really excited about Optima Batteries joining this build! Better late then never... A look at the tray for the house batteries.
How about this for a sneak peak and the answer for the above part! If you own a Chevrolet van these will be available very soon.
We are also really excited about Optima Batteries joining this build! Better late then never... A look at the tray for the house batteries.
villageidiot327
Explorer
sway bar links?
bknudtsen
Expedition Leader
Tie rods.
Weldtec Designs
Supporting Sponsor
ProAir LLC Install
I wanted to take a step back a little and show you the rear AC unit that we had installed by ProAir LLC in Rancho Cucamonga, CA. These guys were extremely helpful in explaining all of the different configurations and unit we could run. This unit is 42000 BTU of cold air for the rear passengers and is tied in to the stock setup on the van. You do have the ability to do a stand alone system however we thought the tie in would be enough. It not only freezes the occupants but will provide warm air as well. With factory like controls in the dash it not only looks and works great but is priced right. The Kit comes with everything you need for the DIY guy or professionally installed by them. All in all this is great and I look forward to putting it to good use. Of course with the interior cage we had to get a little more creative with the location a nd mounting of the unit.
I wanted to take a step back a little and show you the rear AC unit that we had installed by ProAir LLC in Rancho Cucamonga, CA. These guys were extremely helpful in explaining all of the different configurations and unit we could run. This unit is 42000 BTU of cold air for the rear passengers and is tied in to the stock setup on the van. You do have the ability to do a stand alone system however we thought the tie in would be enough. It not only freezes the occupants but will provide warm air as well. With factory like controls in the dash it not only looks and works great but is priced right. The Kit comes with everything you need for the DIY guy or professionally installed by them. All in all this is great and I look forward to putting it to good use. Of course with the interior cage we had to get a little more creative with the location a nd mounting of the unit.
Bikersmurf
Expedition Leader
How about this for a sneak peak and the answer for the above part! If you own a Chevrolet van these will be available very soon.
We are also really excited about Optima Batteries joining this build! Better late then never... A look at the tray for the house batteries.
It's too bad they're made out of rolls of money... I've got the perfect spot for a bank like that... Who needs a spare anyways.
wjeeper
Active member
Tell me about it! We had one stolen at work (sitting on the side of the road running GPS equipment) and it was on my dime.......
wjeeper
Active member
Just looked at your facebook acct and saw you spraying some Custom Coat bedliner! I am really interested in seeing how it turns out, I have been considering shooting my van in one of their tinted liners. A wrap would work but it just wont cover the dents and dings like liner will
Weldtec Designs
Supporting Sponsor
yay... someone is following us on social...... It turned out great, i have it on my van and really like it. Not to mention is affordable and really easy to spray.
REDOVAL
Adventurer
After having to paint the roof of my last van I can see significant benefits to spraying this on the roof before any rust or paint degradation occurs. Figures though, my van's color is unique enough to be an issue. Do we know if the tints can be mixed?
Scott Thompson
Vantage Optics
Weldtec Designs
Supporting Sponsor
Yep they can be mixed and color matched! The grey i did on this was color matched, you add the tint to a base similar to paint.
Weldtec Designs
Supporting Sponsor
KIcker speaker boxes
We are running 2 12" Kicker Audio subs in the #roadtosema Chevrolet with the 4x4 quigley conversion. Here is look at the custom boxes for the subs.
Here is a look at the rear bed frame we are running. This was a horrible bed setup untill we got our hands on it and completely modified it to occupy less space.
We are running 2 12" Kicker Audio subs in the #roadtosema Chevrolet with the 4x4 quigley conversion. Here is look at the custom boxes for the subs.
Here is a look at the rear bed frame we are running. This was a horrible bed setup untill we got our hands on it and completely modified it to occupy less space.
