Meili
Adventurer
Another thing I found was the sealing I did on the rear of the bed worked well. It worked so well that it holds a large quanity 40 degree water while camping.
I found this out one am while getting out of the warm camper when I sat on the ledge. Talk about a shock, instant cold-wet ********!
The hi-tech solution was to drill 3 drain holes.
Also will be removing the seal from the bottom sill and putting it on the door out of harms way. Seems someones hiking boots like to tear it up. Doh!
Last was to create a better way to carry some tools. I have one of those Craftsman tool box that are made from plastic with 4 drawers that have a molded spot for each tool.
I love it, holds the tools in place even when bouncing around in my old trucks bed as long as there is a bungee around it keeping it closed. Problem is it does not fit in any cabinet.
I used guts from some old drawers and a piece of wood from my old water bed frame to make the rack. When the door is closed, it locks the drawers in place.
Worked out pretty well, the shelves still need to be glued but I am going to hold off until I see how the wood reacts varied weather conditions.
Don't want it swelling up ,locking everything in place.
24,601
I found this out one am while getting out of the warm camper when I sat on the ledge. Talk about a shock, instant cold-wet ********!
The hi-tech solution was to drill 3 drain holes.
Also will be removing the seal from the bottom sill and putting it on the door out of harms way. Seems someones hiking boots like to tear it up. Doh!
Last was to create a better way to carry some tools. I have one of those Craftsman tool box that are made from plastic with 4 drawers that have a molded spot for each tool.
I love it, holds the tools in place even when bouncing around in my old trucks bed as long as there is a bungee around it keeping it closed. Problem is it does not fit in any cabinet.
I used guts from some old drawers and a piece of wood from my old water bed frame to make the rack. When the door is closed, it locks the drawers in place.
Worked out pretty well, the shelves still need to be glued but I am going to hold off until I see how the wood reacts varied weather conditions.
Don't want it swelling up ,locking everything in place.
24,601