Securing 11lb LP tanks

[PSea]

Just wondering if anyone has found a less expensive mount for securing the smaller, 11lb propane tanks to their trailer. Looking for ideas.

 

[tae73]

This worked for mine, just double check your diameter of tank. They make other sizes also.

http://www.airgas.com/product/Gas-E...nt-(Cages,-Stands,-Racks,-Caps)/p/RAD64003556

 

[dreadlocks]

the short fat ones fit perfectly in a milk crate

 

[PSea]

EXACTLY what I was looking for! I believe my tank's diameter is 9“ (kings flame ysn011). Thanks!

 

[shade]

This worked for mine, just double check your diameter of tank. They make other sizes also.

http://www.airgas.com/product/Gas-Equipment/Gas-Equipment-Accessories/Cylinder-Support-Equipment-(Cages,-Stands,-Racks,-Caps)/p/RAD64003556

I may use that for a Corny keg I carry water in. Great price. Thanks!

 

[2Jeeps&PatriotX1]

I have two mounted on front of my trailer. One on each side of the front hood that has the maxtracks mounted. The propane holders are brackets mounted to the trailer with a base plate built into the bracket. It then has a strap that tightens across the front of the bottle. All behind the black protection you see in the pic, that also have an open bottom. Hard to explain in words and didn’t have better pics on my phone.

Sent from my iPhone using Tapatalk

 

[PSea]

Nice install. Sweet trailer. Like the max tracks mounted in front. Protects from rocks a bit.

 

[PSea]

If anyone is looking for one of these, I found the mounts for much less.

Google Shopping Help

Official Google Shopping Help Center where you can find tips and tutorials on using Google Shopping and other answers to frequently asked questions.

express.google.com

 

[PSea]

If anyone is looking for one of these, I found the mounts for much less.

Google Shopping Help

Official Google Shopping Help Center where you can find tips and tutorials on using Google Shopping and other answers to frequently asked questions.

express.google.com

Received them. Stout. But the rubber lining on the clamp comes off easier than id prefer. Going to use a little adhesive to address it. Happy with them otherwise.

 

[krick3tt]

I secure mine to my roof rack. Made a simple sheet metal base that attaches to the tank with 'J' bolts cut from 'U' bolts (used to tighten cable) and then the tank base to the rr. The bolts remain in the rr and the base is attached with wing nuts over flat washers and lock washers. Has remained very stable and secure over many rough roads and easy to remove to use on the stove or the campfire in a can. I had a unit similar to the one posted previously when an upright propane tank was on the trailer, also very secure.

 

[PSea]

Nice setup.

I got the taller/narrower ones. Want them mounted inside a rear tool box I plan to add.

 

[tae73]

Received them. Stout. But the rubber lining on the clamp comes off easier than id prefer. Going to use a little adhesive to address it. Happy with them otherwise.

I will say that was about my only complaint with the rubber, once its around the tank no issue.

 

[krick3tt]

I also have a tall upright can that I made a horizontal mount for. I have had no issues carrying it on the side.