Securing a Zodi Extreme water tank

[Scoutman]

I picked up a NIB Zodi Extreme shower (no heater) for $40 the other day off of CL and am looking for a way to secure it to the wall of my truck bed. I would like to have it upright and close to the tailgate so I can use the pressurized water for cooking, washing dishes, rinsing off, filling dog water bowl, etc. Any good ideas out there short of some straps, bungees, jumbo quickfist's or some $100+ bracket? The walls of the tank seem kind of thin so I hate for it to be bounced around with the rest of the gear back there. Easily removable to heat on the stove is a bonus. Lockable is a double bonus. The tank diameter is pretty close to 8.375"

 

[MANUCHAO]

I use quickfist for my Zodi.
I also have used gear twist ties for 5Gal water jugs and these work great as well....
You could also get a fire extinguisher bracket and mod the metal band to fit your Zodi...

 

[Scoutman]

I use quickfist for my Zodi.
I also have used gear twist ties for 5Gal water jugs and these work great as well....
You could also get a fire extinguisher bracket and mod the metal band to fit your Zodi...

So far those seem to be the best options. I had a buddy with a steel 20# CO2 tank bracket and while it's intended for the bigger 8" tanks it would need some mods to fit the Zodi. The backing part of the mount worked fine since it was close enough to the diameter. I think a couple of quick fists and one of these would work but now the cost is adding up.

A TH108 bracket from 4bsbrackets would probably work too but I'd probably want 2 of them and they're about $30 each.

 

[Scoutman]

Sent from my XT1585 using Tapatalk

 

[Scoutman]

The arms don't have the correct curve and want to scratch and dent the tank

Sent from my XT1585 using Tapatalk

 

[Robert Bills]

Perhaps you could use these "Super Quick Fist" clamps instead, which hold objects up to 9.5" in diameter:

 

[Scoutman]

Was looking back at this project again and stumbled on these. Seems the most common SCUBA tanks are slightly smaller than a Zodi at ~7.25" dia but there seem to be some adjustable options out there to secure various sizes of tanks.

https://www.amazon.com/XS-Scuba-Tank-Holder/dp/B00VHURVIG/ref=sr_1_1?ie=UTF8&qid=1478199191&sr=8-1&keywords=scuba+tank+holder