I’m looking at a few tires and in a few different sizes for my 16” wheels. I’m thinking 235/85/16, 265/75/16 or 245/75/16(probably not this as I want larger diameter)
I’ve got bridgestone revo 3’s in 265/75, and had cooper at3’s in the past in 235/85 Cooper’s were 10 ply and bridgestone are 4.
I remember not being very impressed with the coopers in 2wd and not aired down, would get wheelspin pretty easy and have to go to 4 in spots I should have been able to pass sticking to 2. with the bridgestone in similar terrain, loose soily gravely Colorado dirt, and loose baseball sized debris. I could cruise along in 2low in situations that I did not expect to be able to. And no airing down. I didn’t do much serious off-roading in the coopers to be able to judge.
now i think the bridgestone might just be a better tire, I’ve been super impressed with it. That plus I think i mistakingly ran the coopers at too high of pressure for the low weight of my rig and considering they’re 10ply, that could have been all the difference right there and maybe it wasn’t a factor of width.
so that’s my minimal experience.
Anyway I’m now deciding between a set of the same size revo’s or try the falken wildpeaks in 235/85, or in 4 ply 265/75.
Weights a big factor on my underpowered right that’s why I narrowed down to the revo’s, coopers and wildpeaks. Otherwise I really wanted to try the st maxx.
my off-roading is typically in Colorado conditions like described above, the typical loseish soil, some wet/ slime. And a good amount in Moab area, so slickrock, sand, loose debris and sand over sick rock.
I could see a wider tire working well for high grip slickrock type terrain, while from what I understand skinnier might be better for looser low grip surfaces?
A big concern of mine is off camber situations and traversing side hills, I’ve got a pretty top heavy rig, not sure how much tire shape can help to alleviate that though. I was thinking skinny tires with spacers would be better than wide tires with no spacers?