I am reluctantly selling my camper and side boxes to make room for a new (to me) flat bed Hawk
A brief description of the set up:
I needed more exterior storage and still wanted a simple camper so I opted for a Norweld tray with custom Norweld side boxes to act as bed sides and storage.
Skiing and snowboarding was in mind when getting these built as well as outdoor work stations, table, kitchen, etc.
they could be modified to be bolted onto the jacking points and run as a wider set up for a regular truck bed.
The camper is a one owner, bought by me at RMFWC in Denver, CO.
The camper has some cosmetic damage on and by the rear door from a bike handle bar, roof has a few small dings and some minor striping from branches and the decals aren’t perfect anymore.
Location: Westminster, CO
Camper $18,500 Firm:
-2014 Hawk Shell
-Roll over couch
-Furnace
-Stove
- X2 powered roof fans (1 Fantastic, 1 Max Fan)
-Rear flood lights
-Custom Arctic pack ( Factory FWC with 3/4” primaloft and double radiant barrier)
-Custom insulated curtains
-Modified counter top with utensil drawer and cubby
-L-track tie downs for your choice of storage (we currently use a rubbermaid)
ARB 50QT Fridge
-5 gallon cassette toilet
-Eazi Awn 270 degree batwing awning
-150 Amp Hour Lead Acid AGM batteries (12V)
-220Watts Zamp solar with custom 80/20 rack that mounts to yakima rails and Zamp 30ZS charge controller
Yakima cargo bars
- Camper jacks
Side Boxes $6000 OBO:
Made by Norweld
Double latch
Locking
A few notes of mention:
- The 5lb propane tank is negotiable but not included in the price of the boxes or camper
- The Wilco Swing arm is also negotiable but not included
- The Molle organizers for the side boxes are negotiable but not included
- Any of the gear pictures in the camper (pots/pans, etc.) isn’t included
I have a bunch of other items that are too many to list that can be discussed with interested parties, like a water system, Noco shorepower/charger, etc.
Thanks for looking at the Ad!
Brydon
A brief description of the set up:
I needed more exterior storage and still wanted a simple camper so I opted for a Norweld tray with custom Norweld side boxes to act as bed sides and storage.
Skiing and snowboarding was in mind when getting these built as well as outdoor work stations, table, kitchen, etc.
they could be modified to be bolted onto the jacking points and run as a wider set up for a regular truck bed.
The camper is a one owner, bought by me at RMFWC in Denver, CO.
The camper has some cosmetic damage on and by the rear door from a bike handle bar, roof has a few small dings and some minor striping from branches and the decals aren’t perfect anymore.
Location: Westminster, CO
Camper $18,500 Firm:
-2014 Hawk Shell
-Roll over couch
-Furnace
-Stove
- X2 powered roof fans (1 Fantastic, 1 Max Fan)
-Rear flood lights
-Custom Arctic pack ( Factory FWC with 3/4” primaloft and double radiant barrier)
-Custom insulated curtains
-Modified counter top with utensil drawer and cubby
-L-track tie downs for your choice of storage (we currently use a rubbermaid)
ARB 50QT Fridge
-5 gallon cassette toilet
-Eazi Awn 270 degree batwing awning
-150 Amp Hour Lead Acid AGM batteries (12V)
-220Watts Zamp solar with custom 80/20 rack that mounts to yakima rails and Zamp 30ZS charge controller
Yakima cargo bars
- Camper jacks
Side Boxes $6000 OBO:
Made by Norweld
Double latch
Locking
A few notes of mention:
- The 5lb propane tank is negotiable but not included in the price of the boxes or camper
- The Wilco Swing arm is also negotiable but not included
- The Molle organizers for the side boxes are negotiable but not included
- Any of the gear pictures in the camper (pots/pans, etc.) isn’t included
I have a bunch of other items that are too many to list that can be discussed with interested parties, like a water system, Noco shorepower/charger, etc.
Thanks for looking at the Ad!
Brydon
Last edited: