SOLD - 2014 Toyota Tacoma DCSB 4X4 w/James Baroud EVO & 270 Awning - $29.7K

[OldManJack]

2014 TOYOTA TACOMA for SALE - $29.7K


I am selling a charcoal grey, 2014 Toyota Tacoma Dual Cab Short Bed Truck, 4.0L V6 F DOHC 24V, gasoline, rear wheel drive, 4x4 (VIN 3TMLU4EN0EM156718) which has been modified for Overlanding.

I am the second owner of this vehicle and purchased the vehicle in 2018. This vehicle has only had one minor damage and it was to the left rear taillight which I’ve replaced. I purchased this vehicle in Tennessee and now I live in Georgia where it is titled. It is a very good vehicle and I have not had any issues whatsoever. The vehicle performs very well. I have kept the oil changed regularly. I have lovingly modified this vehicle and have done things right. I do hate to see it go, but I no longer find overlanding as a viable travel option for my wife and me.

The JAMES BAROUD tent was used only three times and several components were never used. Other than the tent, all components come in very nice bags for storage. The tent is well secured to the truck using Front Runner products. The electrical system was designed and built by Overland Power Solutions. Their work is top-notch and provides you access to power via 2 power hubs one of which is located in the back seat and the other in the back of the truck under the canopy. This system also includes a 100Ah accessory battery, portable solar panel and Victron Pure Sine 800-watt inverter.

Except for the Apple Car Play Radio, the following components were purchased after 3/2021:


Platform Details

-2014 Toyota Tacoma Dual Cab Short Bed Truck, 4.0L V6
-Color: Magnetic Gray Metallic
-Mileage: 121k
-Automatic


Build Details

-Leer Camper 100XQ 64TCDC Canopy
-Front Runner Leer Canopy Slimline II Rack Kit
-Front Runner Slimline II Roof Rack Kit/Low Profile
-James Baroud 2021 EVO Tent (has been used only three times)
-James Baroud Isothermic Kit
-James Baroud Side Awning Tunnel
-James Baroud Falcon Shower Kit
-James Baroud Side Walls for Falcon Awning
-James Baroud Anti-condensation Mattress Pad
-James Baroud 270 degree Falcon Awning
-James Baroud Mosquito Net for Falcon Awning
-Front Runner Quick Release Tent Mount Kit
-20lb Propane Tank Mount
-Jerry Can Fuel bracket w/base (2,20L Cans)
-Mountain Hatch Tailgate Cutting Board
-Victory 4x4 Bed Stiffeners


Wheels and Suspension

-KMC XD129 Holeshot Wheels
-33" Nitto Ridge Grappler / LT285/70 R17 10ply w/6,700mi
-ARB Old Man Emu 3" Lift Kit (Heavy Load)
-ARB EL46XL extra leaf spring
-Timbren SES TORTUN4-P1 Rear Suspension Bump Stops, 6k lb capacity


Armor

-ARB Deluxe Bar
-Warrior Rear Bumper w/ 2 shackles


Lighting

-Pro Comp 5" LED Round Motorsports Lights
-LED 27W Ditch Lights w/ brackets


Electrical

-NorthStar Group 27 AGM Starter Battery
-Dual Battery System by Overland Power Solutions
-100ah SOK LifeP04 Accessory Battery
-REDARC BMS1230 Battery Management System for DC/DC
-MPPT Solar Controller
-Shore Charging and monitoring
-2 resettable circuit breakers as needed 40a and 150a
-Victron Pure Sine 800-watt inverter
-Power distribution safety hubs w/fuses (1 in back seat and 1 in the bed)
-4 High speed USB chargers
-12v Dash socket/acc ports
-Overland Solar Bugout 130 Solar Panel


Inside the Canopy

-Decked Drawer System, 2 pull out drawers
-8 - Bed tie down mounts
-2, 48” Core Trax 1000 tie down tracks mounted/8 stainless steel loops included


Recovery

-Smittybilt X20 10k Synthetic Rope Wireless Winch w/ Fairlead
-Factor55 FlatLinkE Foldable Winch Shackle Mount w/rope cover
-ARB Recovery Point


Interior

-Expedition Essentials 2TPAM Dash Accessory Mount Powered w/ Wiring Cover
-Apple Play Radio/JVC KW-V840BT
-Backup camera
-DesertDoesIt Fire extinguisher mount panel
-Seat jackers (front & rear)
-Weather Tech floor mats
-Meso Custom Ultimate Interior Lighting Kit
-Center console & glove compartment organizers
-AJT Design Tacoma Shift Knob



Miscellaneous

-Westin HDX Drop Step Bars
-Redline Tuning Hood QuickLIFT


No trades or swaps. Selling vehicle with above listed items only.


Note: The rear seat and all components will be provided as part of this sale.

 

[Mistuhmao]

Nice rig! How did you mount the Evo, 270 awning and the shower cube to the front runner rack? If you could provide specific details about which mounts you used for each part, that would be awesome b/c I'm interested in doing this set up as well on a front runner rack. Thanks!

 

[OldManJack]

Thanks! I included some shots below. Mounting wasn’t difficult as long as you have some friends to help with the 270° awning. It’s heavy and aligning all the bolts requires help.

JB included the brackets with my 270° awning. I had to modify the supplied shower brackets as I had to mount them on top of the rack. I did have to go purchase some different sized bolts and aluminum stock (as a spacer) to make it all work.

Aligning the tent, tunnel and awning was a challenge for me. I’d be glad to either talk if you have any questions. I have a lot of experience with this as it was primarily by trial and error.

Hope the pictures help.

 

[Mistuhmao]

Thanks for the additional pics--super helpful! Looks like it will have to be trial and error for me as well, but it's good to see how you used the JB mounts with the FR rack. Did you ever try using the FR universal mounts? I'm assuming they didn't work b/c they didn't stick out enough from the sides to clear the edge of the tent.

 

[OldManJack]

No, I didn't use the FR mounts. You are correct, the width of the tent is a concern. I would recommend using the FR quick release mechanism. Makes it a lot easier adding and removing your JB EVO.

 

[Timbren]

Clean Build! Good luck with sale.