SOLD: Rigd UltraSwing with UltraPlate and Bike extension

mrezo

New member
Used on two trips year and is in excellent condition. I paid over $1,650 with taxes and shipping. Asking $1,300.

Sale includes:
  • UltraSwing MultiFit
  • Front Runner Table
  • Rago fabrication UltraPlate
  • Bike rack hitch extension with wobnot locking bolt
  • Locking Bolt for Hitch
Rigd Supply is backordered on these units until after 8/31 as stated in their website.

Here’s your chance to get one before the end of the summer.

Comes with all original hardware and stickers. BORA 1.25” wheel spacer can be included for $75 extra (fits Land Rover and BMW bolt patterns)

No shipping, pick up only. Located in Pleasant Hill, CA.
 

Attachments

  • A6F30603-3862-404F-976E-09BD1E77F7E4.jpeg
    A6F30603-3862-404F-976E-09BD1E77F7E4.jpeg
    100.9 KB · Views: 290
  • BEC14F21-51B2-4550-A58F-BCE8C884E7A4.jpeg
    BEC14F21-51B2-4550-A58F-BCE8C884E7A4.jpeg
    119.8 KB · Views: 278
  • FF1D8EBB-AA04-41D4-AC94-A63A69381FBF.jpeg
    FF1D8EBB-AA04-41D4-AC94-A63A69381FBF.jpeg
    113.2 KB · Views: 268
  • 7DA99ECD-24D2-48D4-91EE-351566091DE4.jpeg
    7DA99ECD-24D2-48D4-91EE-351566091DE4.jpeg
    113.1 KB · Views: 272
  • 5867B1BA-B7DB-4113-BE89-7F0AD9EC9C74.jpeg
    5867B1BA-B7DB-4113-BE89-7F0AD9EC9C74.jpeg
    82 KB · Views: 284
  • 07953695-1A21-4BDD-A765-0FAC338396E3.jpeg
    07953695-1A21-4BDD-A765-0FAC338396E3.jpeg
    125.2 KB · Views: 266
  • 3137218B-720B-41E0-8AA2-90AF2735AFE8.jpeg
    3137218B-720B-41E0-8AA2-90AF2735AFE8.jpeg
    105.3 KB · Views: 268
  • 26DADDB8-F1BE-485A-993E-5F8E1CA9A146.jpeg
    26DADDB8-F1BE-485A-993E-5F8E1CA9A146.jpeg
    94.9 KB · Views: 261
  • 3B6E3569-76C6-434C-9D27-63CB39E5D982.jpeg
    3B6E3569-76C6-434C-9D27-63CB39E5D982.jpeg
    96.5 KB · Views: 246
Hey I might be interested. Was this fitted to that LR3/4 in the background? Factory hitch or aftermarket? Trying to figure out if it will my my LR3 with a Rhino Ox Hitch.
 

mrezo

New member
Hey I might be interested. Was this fitted to that LR3/4 in the background? Factory hitch or aftermarket? Trying to figure out if it willw my my LR3 with a Rhino Ox Hitch.

It was fitted to my LR4 using the factory hitch receiver.

Here’s some pics of it installed.

It might not fit the shallow receiver of the Ox Hitch. The hitch length from the center of the locking pin to the end is 3 and 9/16’s of an inch long.

Sending PM in case your still interested.
 

Attachments

  • 30B94BE6-4B75-4235-AD2B-18D3284C9B52.jpeg
    30B94BE6-4B75-4235-AD2B-18D3284C9B52.jpeg
    123.6 KB · Views: 193
  • 2361F1F1-9572-4AEC-9C1D-837D75B755CF.jpeg
    2361F1F1-9572-4AEC-9C1D-837D75B755CF.jpeg
    127.1 KB · Views: 177
  • B8044DD9-5A66-49BF-920E-7D92018DE758.jpeg
    B8044DD9-5A66-49BF-920E-7D92018DE758.jpeg
    121 KB · Views: 174
  • 4F35108A-3154-4D5D-8810-0B25C769F917.jpeg
    4F35108A-3154-4D5D-8810-0B25C769F917.jpeg
    130.6 KB · Views: 171
  • ACC46725-64F7-4430-A53E-BE96E5689951.jpeg
    ACC46725-64F7-4430-A53E-BE96E5689951.jpeg
    144.8 KB · Views: 153
  • BBCC8BAF-9409-488D-A550-5C216ACB0F1A.jpeg
    BBCC8BAF-9409-488D-A550-5C216ACB0F1A.jpeg
    96.8 KB · Views: 150
  • 09744E18-F286-459D-9A70-AD729C9A6306.jpeg
    09744E18-F286-459D-9A70-AD729C9A6306.jpeg
    91.8 KB · Views: 153
Last edited:

tvo3405

New member
What is your number? I'm in San Jose, CA and interested to see if this would fit my needs for my Smitty Bilt Scout trailer.
 

Forum statistics

Threads
186,762
Messages
2,889,809
Members
227,012
Latest member
dalewelsh
Top