Spark Plug Order

[Atrais]

Got everything back together from my timing belt, valve seal job but it's got a rough idle. I'm going to check vacuum lines again and maybe take a look at the IAC but can someone confirm for me that the order of the spark plugs leads into the coil packs is (5,2) (4,1) (6,3) as you're looking at the engine? Just want to double check.

 

[jeep-N-montero]

Here you go, diagrams and everything https://www.google.com/?gws_rd=ssl#q=mitsubishi+montero+sport+spark+plug+firing+order

 

[Atrais]

Here you go, diagrams and everything https://www.google.com/?gws_rd=ssl#q=mitsubishi+montero+sport+spark+plug+firing+order

Thanks, I did google it at first but even within those results there are different diagrams. For instance where one says (5,2) another may say (2,5). Does the order of the plugs on the coil not matter so long as the two wires go to the correct cylinder?

 

[BEG]

Take a close look at your intake, near the coil mounting locations. If I remember correctly, the order of the plug wires is actually cast into the metal.

 

[jeep-N-montero]

Take a close look at your intake, near the coil mounting locations. If I remember correctly, the order of the plug wires is actually cast into the metal.

They are stamped with the numbers on the manifold.

 

[Atrais]

They are stamped with the numbers on the manifold.

(-__-)

Sure enough. This is what happens when I work on it tired. Thanks.

Now to figure out the idle issue.