Spring Isolators

[Howski]

After installing my winch, the front end of my DII started to sag slightly. I am considering getting isolators to raise it back up a little. I am unsure whether or not to put them on just the top or on both top and bottom. How much of a boost does an isolator usually give?

 

[timmy!!!!!!!]

You can put them on the top and bottom

 

[leeawalden]

Man, I've never really measured them, I would guess around a half inch tops. why not just get a set of 1" spring spacers? How much sag you talkin?

 

[Howski]

I'd say 1/2" or 3/4". It was perfectly level before the winch with DI spring seats and a pair of isolators in the rear. It's not bad enough where I'd need to move to a 1" spacer.

 

[leeawalden]

Id go ahead and buy 4 of them, enough to the the top and bottom, if you don't use them, you can just throw them in a drawer or box...the fall apart over time.

 

[Howski]

where's the cheapest place to pick some of these up?

 

[leeawalden]

I'd call Will, Marty, PT, or Paul, (any of the part guys) and see if they have any used ones in good shape, if not Atlantic British has them. I only say spacers because You could buy a set of spacers cheaper than a bunch of the isolators...new anyways.

 

[Paladin]

Don't you already have isolators? I thought the D2's had them from the factory already.

 

[Howski]

Don't you already have isolators? I thought the D2's had them from the factory already.

They come from the factory with isolators top of the rear springs. None in the front.