I've been trying to figure out my sleep platform and drawer configuration for the past 2 years. Well, I think I have finally figured it out. I am trying to build to to where if I ended up getting a Flippac I could keep much of the safe configuration. On to the beginning of the build.
I purchased 2 of the AT Overland birch drawers because of the perfect size and quality of craftsmanship. Then proceeded to modify a bit by replacing the tops so that they would extend the full width of the truck bed. I also cut 1" pucks to lift the drawers up so that I could slide things underneath of them and make them even with the truck wheel wells. I added a blue sea fuse block tapped off of my secondary battery for power to the overhead red or white lights, fan, and shower pump. I am also working on adding a rear box to house a 7 gallon water tank and 1 gpm pump for cold water showers on the road. Below are the pics of the work in progress. I have the passenger side drawer setup with all our cooking supplies and the driver side is generally used for clothes on a trip. The new pieces still need to be stained and everything will eventually be covered with monstaliner.
Drawers with new top and 1" pucks
Fuse Block
Full view of reading lights
White Lights
Red lights
Shower pump
Shower connection and switch
Cooking drawer setup
I also removed the seat behind the driver and replaced with a custom platform with water, frig, and fire extinguisher. There is also added storage under the platform.
I purchased 2 of the AT Overland birch drawers because of the perfect size and quality of craftsmanship. Then proceeded to modify a bit by replacing the tops so that they would extend the full width of the truck bed. I also cut 1" pucks to lift the drawers up so that I could slide things underneath of them and make them even with the truck wheel wells. I added a blue sea fuse block tapped off of my secondary battery for power to the overhead red or white lights, fan, and shower pump. I am also working on adding a rear box to house a 7 gallon water tank and 1 gpm pump for cold water showers on the road. Below are the pics of the work in progress. I have the passenger side drawer setup with all our cooking supplies and the driver side is generally used for clothes on a trip. The new pieces still need to be stained and everything will eventually be covered with monstaliner.
Drawers with new top and 1" pucks
Fuse Block
Full view of reading lights
White Lights
Red lights
Shower pump
Shower connection and switch
Cooking drawer setup
I also removed the seat behind the driver and replaced with a custom platform with water, frig, and fire extinguisher. There is also added storage under the platform.
Last edited: