Here is a shot of the days work load. I installed a new inverter and cleaned up some wiring on that side of the box, then started work on wiring the area lighting, tent power and lights, tongue box and tub lights. I had two Boston Butts smoking on the grill and couldn't go anywhere for 12 hours.
Cutting in the Blue Sea 4 position switch panel.
Perfect fit.
With Cover on.
The cut out.
All done. I forgot to put the fuse box cover on, just noticed that. Ha.
Tongue box lights. I used a Marine grade LED lighting strip that has a sticky back. So easy!
Area lights. I used a Northern Tool Ironton Square LED Work Light set that I got on sale. They are brighter than I expected, but I'm ok with that. I had to make some custom mounts so the lights could be adjusted in the field without tools. I'll get some pictures of that and post them up later.
Tent lights. Marine LED Light strip on the top cross bar. I can control the tent and future front area lighting from the control box I made.
Tub lights. Again, the Marine Grade LED strip. There is a switch box mounted in the Lid of the Tub. I turn on main power from the Tongue box and can switch at the tub when needed. I put the tongue and tub switches in series so I can make sure it's off when closed.
That's about all for now.
I forgot to post the Pulled Pork picture. Mmmmmm good. Just a light dry rub and smoke over some apple wood chunks. Moistened with apple juice every so often.
