scruff1968
Member
just about to start my 3rd trailer for my son who's family has grown.thinking of making o body similar to to a turtle back with a 2.2m rooftop tent.
trailer 3
- Thread starter scruff1968
- Start date
gatorgrizz27
Well-known member
About to start building something similar, care to share more of your plans?
scruff1968
Member
howdy guys, have lost a little motivation on this one but have done a bit.frame is ally 50x50x3 rhs and 50x3 angle.will have one door in front left side for storage.one rear door for access to fridge and draw above fridge.there will also be the switches, volt gauge and plugs above draw.on the other side will be a 1200mm pull out kitchen.also on the rear will be swing away spare tyre and jerry can.will use aluminium comp panel on side with ally rear door and roof.unsure if will be fitted with 1800-2200mm rooftop tent or go down 30 sec oztent
scruff1968
Member
also on the pull will be a basket for wood ect and in front of fringe will house battery, brake controller,dc-dc charger ,water pump and fuse block
do you say this because jack is on the wrong side?
Old bike doc
Active member
Looking good!
scruff1968
Member
just a few progress photos
