Crosley623
New member
Well finally getting started on my winter project of custom flatbed camper build. Just picked up a 23 Chevy 2500HD. It’s the short bed model and I’ve found an aluminum flatbed to buy. Flatbed is 90w x 96 long. Should be perfect but I may trim the width down.
Hopefully get started this week but wanted to ask about the swap for advice on swapping the wiring.
Trailer - will be easy to swap out and mount near the hitch.
Reverse Sensors - hoping that it’s as easy as promising and mounting in holes on the skirt of the flatbed.
Brake Lights - should be easy swap
Rear Camera - just remove for now. Buy an aftermarket camera to install in the camper framing and be able to splice into the factory wiring?
Any info or advice would be awesome!
Sent from my iPhone using Tapatalk
Hopefully get started this week but wanted to ask about the swap for advice on swapping the wiring.
Trailer - will be easy to swap out and mount near the hitch.
Reverse Sensors - hoping that it’s as easy as promising and mounting in holes on the skirt of the flatbed.
Brake Lights - should be easy swap
Rear Camera - just remove for now. Buy an aftermarket camera to install in the camper framing and be able to splice into the factory wiring?
Any info or advice would be awesome!
Sent from my iPhone using Tapatalk