Just completed a new installation and am having trouble with the furnace "coding" and shutting down. It's in a Fuso FG, but that does not matter of course. If anyone can help I'll come back and explain the problem and what I have done to test it. I purchased everything from Heatso and they have been hit and miss with their "support" eMail. Thanks.
Webasto Dual Top Evo 8
- Thread starter Alpina FG
- Start date
Czechsix
Watching you from a ridge. In Alaska. I'm cold.
If you are located anywhere near Southern California, there's a very good tech in the Los Angeles area.
You should be able to read the codes and see where the issue is, but most of the time the one that I had was shutting down due to carbon in the exhaust, and low fuel flow rates. It did finally have to have a board replaced under warranty too.
You should be able to read the codes and see where the issue is, but most of the time the one that I had was shutting down due to carbon in the exhaust, and low fuel flow rates. It did finally have to have a board replaced under warranty too.
Similar threads
