Can holders were mounted with two holes in the body and two holes in the fender, split the seam. The holders have 4 large rubber fender washers between them and the body/fender. Large like 1 1/2'' - 2'' fender washers were used on the back side. More than stout enough for a full jerry can. Warning, Warning, Warning!!!!!! God sake find something else to use for holding down your jerry can than the stock cheep strap that comes with these. If you are doing something similar to me, a ratchet strap to the radiator support rods offers an ideal local for securing. If you go this route do not. I repeat do not ratchet it all the way against your body or you will feel like a tool! keep about an 1/8 to a 1/4 inch space for can expansion and to prevent paint where.
