lately my RRC developed some wired acts.
Whenever I use one of the high current electricals the following happens:
While idle the engine almost stalls. Can stall the car completely by using all 4 window lifters at once.
While driving at constant speeds a short but significant ignition cutout is noticable.
Changed already the altenator because this was my first prime suspect but it still remains after the swap. Tested the new altenator and the Voltage numbers are just fine (idle and under load 14.2 +- 0.2)
Another new thing is that when I turn the key into the start position it takes about 3 seconds until the starter starts up.
Can this all indicate a weak battery? (got it test 2 Months back and was all fine)
Or how does this all belong together?
Whenever I use one of the high current electricals the following happens:
While idle the engine almost stalls. Can stall the car completely by using all 4 window lifters at once.
While driving at constant speeds a short but significant ignition cutout is noticable.
Changed already the altenator because this was my first prime suspect but it still remains after the swap. Tested the new altenator and the Voltage numbers are just fine (idle and under load 14.2 +- 0.2)
Another new thing is that when I turn the key into the start position it takes about 3 seconds until the starter starts up.
Can this all indicate a weak battery? (got it test 2 Months back and was all fine)
Or how does this all belong together?