VinceAtReal4x4's
Winch repair and 4x4 rescue specialist
When I do a custom winch build/repair/restoration, I sometimes have oversupplied materials so I'm making these custom recovery slings out the same USA made 3/8" Dyneema SK75 winch rope I supply on my builds.
These are perfect additions to any recovery kit. They weigh nothing and take up very little room. Ideal for anchoring through a wheel, wrapping an axle, roll cage, crossmembers, B-pillars, UTV ATVs, farm tractors, machinery... whatever it will wrap around! Will hold well over 10,000lbs.
(MBS on rope alone is 18,500lb!)
I add ultra-tough nylon braid sleeving to the looped ends so they can be used with metal shackles or recovery points on bumpers with no worries. I also add a special almost impossible to cut sleeve to the middle of the rope, and then cover that with additional ballistic nylon sleeve!
Prices are from $65-$150 depending on length (6'-10'). Pick up near LA, or shipped for cost.
Right now I have a couple 6ft and 7ft ones. Other sizes will pop up. PM me to ask what I have. (May vary somewhat from pic)
These are perfect additions to any recovery kit. They weigh nothing and take up very little room. Ideal for anchoring through a wheel, wrapping an axle, roll cage, crossmembers, B-pillars, UTV ATVs, farm tractors, machinery... whatever it will wrap around! Will hold well over 10,000lbs.
(MBS on rope alone is 18,500lb!)
I add ultra-tough nylon braid sleeving to the looped ends so they can be used with metal shackles or recovery points on bumpers with no worries. I also add a special almost impossible to cut sleeve to the middle of the rope, and then cover that with additional ballistic nylon sleeve!
Prices are from $65-$150 depending on length (6'-10'). Pick up near LA, or shipped for cost.
Right now I have a couple 6ft and 7ft ones. Other sizes will pop up. PM me to ask what I have. (May vary somewhat from pic)
Last edited:
