Wiring harness plug on FG 639

[simonsnork]

Hello to all the great Fuso minds.

Today I am trying to figure out what model terminal connecter is used for the main wire harness to tail lights of a FG 639. I am looking to convert to LED lights that will be integrated to the habitat box. Only I would prefer to not cut the existing wires. In my online searches, I believe it to be close to a Dt04-6p type connecter. Only the fuso has flat blade prongs versus the round pin type.
If any of you have experience with these minute details and slight nuances of the Fuso type I would greatly appreciate it.
Here are a few pictures of the connector I am referring to.

https://photos.google.com/u/1/photo/AF1QipOMB4srXlIwl8wCgYGKKwSJcwhjXM4R0KlRuchK
https://photos.google.com/u/1/photo/AF1QipO9iXerLL2peHFOwLXKOY0vX-XLr8udykbAId8a

Thanks for any all assistance.

Simon

 

[SkiFreak]

I get a 404 error when I click on either link.
Maybe you can attach the images directly to this post.

 

[simonsnork]

Hi SkiFreak,

I hope these pictures are a little better at showing what I am looking for.
Thanks

Simon

 

[Fugly]

Try the local wreckers for the plugs
Just a thought

 

[kerry]

Can you do a google image search to find a similar one?

 

[SkiFreak]

I posed a similar question some time back, but never really identified exactly which brand of plug Fuso use on their trucks.
One member did respond with a website link, which from memory, could supply a suitable plug, but it was not cheap.

Don't know but I had an email from http://www.aeromotive.us/ the other day. They are a SEMA Member and said they could supply any type of connector I needed.

Maybe this will help.

 

[Spanna 53]

May be you just bite the bullet and cut the harness on the light side solder and heat shrink the new harness for the LEDs on chances are down the track if you change the body or on sell it the plugs will have changed and after having had LEDs you won't go back to bulbs in your tail lights or clearance markers ever again. Ross .

 

[simonsnork]

Thanks for the feedback.

Looks like I'll be snipping the wires.

Simon