teotwaki
Excelsior!
A little while back I bought a Yaesu FT-857D multiband radio, primarily for HF. After playing with it for a bit I decided to get it installed in the truck. I took advantage of the power lines that I ran into the back for the accessory outlets and routed the front panel extension cables back along them in the door sill trays.
I also mounted a dual band antenna for 144/440 MHz and routed the cable through the taillight gasket. I may get the Yaesu ATAS 120A for HF.
Taking the back apart to mount the bracket and run cables
Bracket installed
Install of radio body complete
Tucked in by the fridge
Next I'll decide where the front panel will go.
I also mounted a dual band antenna for 144/440 MHz and routed the cable through the taillight gasket. I may get the Yaesu ATAS 120A for HF.
Taking the back apart to mount the bracket and run cables

Bracket installed

Install of radio body complete


Tucked in by the fridge

Next I'll decide where the front panel will go.