andy_b's latest activity
-
Aandy_b replied to the thread 2022 Ford F350 Suspension.Not on pre-‘23s with stock wheels unless you’re only looking at the mall. They will rub offroad, especially with anything wider than...
-
Aandy_b replied to the thread 2022 Ford F350 Suspension.I think you’ll still need an adjustable track rod and some way to correct castor (drop brackets, radius arms, etc). These trucks once...
-
Aandy_b replied to the thread 2022 Ford F350 Suspension.Depending on the time scale, all suspension components are wear items. The rebuild schedule is something to consider with many of the...
-
Aandy_b reacted to Roam.Wild's post in the thread EarthCruiser will be making the 4x4 upfit for Isuzu and Fuso trucks available with
Like.
He knows nothing, you've seen his build thread. His posts are 98% nonsensical and have nothing to do with what anyone is talking about. -
Aandy_b reacted to GR8ADV's post in the thread EarthCruiser will be making the 4x4 upfit for Isuzu and Fuso trucks available with Like.
Thank god. I thought it was me. I can’t follow this at all. 🙏
-
AHow heavy are you running? I came from Fox 2.0s to Fox 2.5s. Running a semi stock truck weight the 2.0s were fine. Adding 2500 lbs of...
-
Aandy_b replied to the thread 2022 Ford F350 Suspension.Right around 11k. Personally, I’d choose custom springs and save money on the shocks. Getting proper springs really helped my body...
-
Aandy_b replied to the thread 2022 Ford F350 Suspension.I’d wait until you’ve gotten your batteries updated and whatever else you need and then have custom leafs made for your weight. I’d also...
-
AHaving owned a Yank aircraft carrier front and a forward control, I will never go back. Cheers, Peter OKA196 motorhome
-
Aandy_b replied to the thread Anyone disconnect their front sway bar?.I know you weren’t asking me but rear only will increase the tendency for oversteer. On our camper, I have no sway bars on either end...
-
AIt's very important to have shocks with high, digressive damping. These stiffen the damping quite a lot at low shock speeds, such as...
-
AI think a firm support rather than a gas strut would be preferable.
-
Aandy_b replied to the thread I'm BACK!!! 2023 F-250 Tremor build.Gotcha. Yeah, the fit is super tight lol and the BD paint and anodization is pretty thin. Anyhow, glad they’re working. TBH I haven’t...
-
AI am talking about the frames for the lens on the lights themselves. Mine were a little chewed up from messing with them during fitment...
-
Aandy_b replied to the thread I'm BACK!!! 2023 F-250 Tremor build.I assume you run them as long-distance on-road lighting? That had been my primary intent. I guess I’ll keep messing with them. Did you...