Recent content by sassy gopher

They are definitely shorter than blazer and suburban springs. Does reaching hold up? I have never had it done before. Sent from my E6782 using Tapatalk

Hi, I recently picked up a 1979 chevy g20 with a pathfinder 4x4 conversion. From searching on here I have found some good info but could use some more. Is there a list somewhere of what off the shelf stuff they used? I am currently looking into front leaf springs. They are bent the wrong way and...

You can disconnect the linkage and manually put it in 4wd. It really sound like it's riding just on the edge of where it needs to be. Worst case you spent 15 min and I'm wrong best case you spent 15 min and solved a 7 year problem

Sounds like the linkage is not putting it fully into 4hi I have had this issue on several jeeps. Usually it's 4lo. The factory linkage is not so great in stock location move things around or have it get bent slightly and it will not work right. I gave up on constantly messing with linkage and...

Not sure what BFg changed in their compound but the at's you get anymore get really slick after 10-15k the old ones gripped good till they were almost bald. I have never run either of the other two choices. I run 285/70/17 pro imp extreme at's and love them they are a little more agrees dive...

There are times I miss my 04 freedom wj. It was a damn comfortable vehicle. Very easy to sleep in the back. The iro skid is the best single mod you make to a wj. The 103" a tends to get high centered at least with the skid it's no big deal. Other than bumpers costing a mortgage payment or two...

Wich ones? In the 50k I've owned it it's had 30 9.5 Yokohama at's 255/75/17 BFg kms 31 10.5 ko's on canyons 34/9/16 special service and 285/70/17 Procomp extreme at's

Thanks they are dodge magnum steelies, usually hidden behind hubcaps

Currently I'm running h&r's springs. The claim 1.5" front and "1" rear. I ended up with less than 1" (after winch) front and 2.5" rear. I run 2" spacer up front. The rear does need another 1/2" just waiting till I rework the coil mounts and outboard the shocks. It has a ucf 2.5" belly up with a...

Bought this about 2.5 years ago. With 64k miles it now has 113k. This is the day I bought it. Wheelin after first round of mods Modified trail gear bumper. I'm obcessed with adding torpedo ports to bumpers

I really like the versatility of this trailer. Seems simple and rugged enough without going overboard just for the wow factor.

I have a friend who is on the smaller side. He uses a hammock. He has mastered bracing himself and flipping it over to drain. I swear one these days he will slip out of the hammock and into the puddle. So far he has been lucky

I was supposed to be cleaning the garage yesterday. Found the cooktop from a parts coleman I have. And this idea came to me. The shelves I had for years. Lightweight and set up and take down easy. They also fit through the small door of my camper. I was a little Leary about plastic and heat...

First decide what you want, what you need, and what you can afford. From there read through the many builds here for inspiration.

Took jscherbs idea and ran with it. Replaced the box that came on the camper with a hf atv rack. I got a buyer for the apache so those funds will go toward a narrower axel to bring the width from 89" down 69-70"