That’s the only thing on that circuit. I’m using the volt meter that I installed to measure it at the batteries and The Dometic app to read it at the fridge.
Sent from my iPhone using Tapatalk
I thought 10AWG was enough but obviously I was wrong. I might make a dedicated 6 or lower AWG to the fridge. Maybe that’s the answer.
Sent from my iPhone using Tapatalk
I am having a problem with low voltage at my fridge which sometimes kicks the unit off while in use. I have two 100w solar panels charging three group 31 agm deep cycle batteries in my cargo trailer. I am reading normal voltage at my power distribution (between 12v and 14v depending on the...
I plan on a similar style rocker on my 2005 Silverado. I’m going to run some support to the frame which will be bushing mounted so it doesn’t tear the cab apart. The cab mounts are also poly so flex between the frame and cab should be similar. I’m interested to see the finished product of yours...
I didn’t use a key, I just cranked the bars up. The truck sits level on the same tires your using. The stock stuff has all been fine for me. I did loosen all the bolts and retorque them once I got my ride height so the bushings would be happy.
Sent from my iPhone using Tapatalk
The falkens are great tires. I have them on 3 different trucks and I’m satisfied with them. My best friend bought a set and he got one that was out of round. The seller replaced it free of charge.
Sent from my iPhone using Tapatalk
It comes up a little short. We just use the space for shoes and for the dog bed. To beef the straps I used a cheap pair of cinch straps cut to fit in place of the factory straps. A 4” mattress would be much less fuss
Sent from my iPhone using Tapatalk
Yeah but it’s tight, really tight. I haven’t had any issues though. I had to beef up the straps on the sides to handle the resistance of compressing the mattress. If I had to do it again I would use a 4”
Sent from my iPhone using Tapatalk
Hi all, I’m starting the process of converting my 6x12 trailer. The trailer is older and has developed a tiny drip in the roof because of some rust. It appears the trailer wasn’t parked level and the water pooled up in a corner which led to the corrosion. I’m looking at a way to seal things up...
Great build, I'm glad that I stumbled upon this as I am I'm the planning phase of my 6x12 trailer conversion. Thanks for all the ideas.
Sent from my SAMSUNG-SM-G891A using Tapatalk
you can get an android unit and mirror it on the 8.4 screens. ive seen a couple dodge trucks set up like that on other forums. if i remember the equipment is a little spendy.
here is a post i found after a quick search...
I was going to do the same thing with my lower arms. They will be pretty long and I figured the extra beef is worth it. Any more updates?
Sent from my SAMSUNG-SM-G891A using Tapatalk