kalieracer
Observer
Truck making some noise
Started out with 1997 SR, with a blown motor. Current State of my build.
3.8L Mivec motor swapped in
Headers
3inch exhaust from the y pipe back
Hybrid intake manfold with VICS
Custom PNP ECU (using the stock harness) ECU with Knock control, vics, mivec and electric fan control
Custom Alloy radiator with uprated transcooler
Custom airbox with water proof snorkel connection - next phase of project
SPAL AC fan upgrade.
SPAL 16inch cooling fan - Next phase project
Uprated oil and externa transcooler / with spal fan - Nextphase project
AEM Wideband Controller
Waterless coolant
170degree tstat
4.63 regear (pending install)
Front locker (pending install)
160a Custom alternator
uprated charge wires and grounds
Chassis -
Fox 2.0 reservoir shocks with LSC adjusters - Custom valved and sized (Pending install)
Siberian Bushings all around
KING (AU) HD rear springs
ADD Swayaway HD torsions
315mm Slotted Cryo treated front big brakes with EBC Red (prototype pads)
Slotted Cryo Treated rear brake rotors
SS extended brake lines and chassis to axle extended line
ADD armor - Next phase of project
Sliders - Next phase of project
16x8 Forged Weld Outbacks with 285/75 Pirelli MTR tires.
Body
99 Safari Grill
99 Head lights
Euro clear corners
Stech switch system
Debadged
Window visors
Alloy roof rack - next phase project
bumpers - next phase project
Interior -
Bouncy seats - Pending install
rear compartment build with second battery- Next phase project
Lighting -
Looking for suggestions.
Started out with 1997 SR, with a blown motor. Current State of my build.
3.8L Mivec motor swapped in
Headers
3inch exhaust from the y pipe back
Hybrid intake manfold with VICS
Custom PNP ECU (using the stock harness) ECU with Knock control, vics, mivec and electric fan control
Custom Alloy radiator with uprated transcooler
Custom airbox with water proof snorkel connection - next phase of project
SPAL AC fan upgrade.
SPAL 16inch cooling fan - Next phase project
Uprated oil and externa transcooler / with spal fan - Nextphase project
AEM Wideband Controller
Waterless coolant
170degree tstat
4.63 regear (pending install)
Front locker (pending install)
160a Custom alternator
uprated charge wires and grounds
Chassis -
Fox 2.0 reservoir shocks with LSC adjusters - Custom valved and sized (Pending install)
Siberian Bushings all around
KING (AU) HD rear springs
ADD Swayaway HD torsions
315mm Slotted Cryo treated front big brakes with EBC Red (prototype pads)
Slotted Cryo Treated rear brake rotors
SS extended brake lines and chassis to axle extended line
ADD armor - Next phase of project
Sliders - Next phase of project
16x8 Forged Weld Outbacks with 285/75 Pirelli MTR tires.
Body
99 Safari Grill
99 Head lights
Euro clear corners
Stech switch system
Debadged
Window visors
Alloy roof rack - next phase project
bumpers - next phase project
Interior -
Bouncy seats - Pending install
rear compartment build with second battery- Next phase project
Lighting -
Looking for suggestions.
Last edited: