AmboLander

FDM2012

Adventurer
I think you’ll need some bigger D ring shackles. ;)

Is your goal self recovery or recovering of others?

For self, your need a 16k+ winch. The general rule of thumb is 1.5x your rigs weight. A good 8k might do it if you’re double lining it, but then you’ll need to get even more complicated if that’s not enough. At least with a 16k, then double line gets you 32k. If 32k won’t do it… then you’re really in trouble.

Those shackles are a 12t, and a 13.5t.

Just trying to be somewhat prepared for whatever....

I am running a 12k winch. Hence, the many snatch blocks.
 

FDM2012

Adventurer
Death Wobble FIX:
The center mount bolt on the trac bar was worn pretty bad, and the frame holes that that it went through were waller'd out worse than a Rhode Island Red.

So, I drilled the holes out to 5/8'', bought a 5'' Grade 8 bolt and drilled it out for greasing the 3/4'' x 5/8'' x 1 3/4'' inner mount sleeve (not shown) that I BootyFabbed. Put in new bushings, and welded a couple of 5/8'' bore x 1/2'' shaft collars to the frame.
So, instead of just the 2 frame pieces only offering a total of 3/8" of pin support,, it now has 1 3/8".

IMG_20220207_1629061.jpgIMG_20220207_1640521.jpg
 
Last edited:

djasinski

Member
The link you posted doesn't work any more. can you post what type of locks you bought? I have a McCoy Miller that I need to replace the locks on. And any tips or advise would be helpful too. Awesome build
 

Forum statistics

Threads
185,897
Messages
2,879,550
Members
225,583
Latest member
vertical.dan

Members online

Top