F150 tire size?

[ITTOG]

I'm running 35x11.5R 20 AT3's with a 2" level on stock wheels.
Very slight rub on pass side in full lock in reverse. So really doesn't occur that often.

I have a level as well so it is great to hear that is what you are running and it works. Only difference is I am using Raptor takeoffs which have +34 offset versus stocks +44 offset.

 

[badm0t0rfinger]

I am thinking my next set will be 35x11.5R17's since the 12.5's didn't work for me.

What does the selection of that size look like? I feel like it can't be too sizeable.

 

[ITTOG]

It is limited but I run Nitto trail grapplers and they are in that size.

 

[phsycle]

If you’re doing the tires, I’d just spend a few more dollars and level it first. Then go 35’s. Looks 100x better. In my area, plenty of Raptor take offs available.

 

[stophe]

I ran 285/75/17 on Raptor takeoffs with no rubbing. It even fit in the spare location- just barely. 2015 F150 but they are the same as 2018, pretty sure.

Can you post some photos of your 285/75/17 on Raptor takeoffs? I have 315's on Raptor takeoffs and am considering going down to 285 size but would like to see what it looks like first if possible

 

[ITTOG]

Here are some examples for you. The truck has been leveled. The stock rims in the first pic have a +44 offset. The other two pics have raptor rims with a +34 offset. The larger tires would rub without the -10 offset. I hope this helps. Not that the last pic is with a RAS system installed so it looks higher in the back. I have since removed the RAS and I do not have any rubbing issues.

Stock
285/75R17
35x11.5x17