youwillforget
Adventurer
The M416 tub went to a military restoration guy. He said in 3 months he will have it fully restored and on a M416 frame.
I’m that guy
- Thread starter youwillforget
- Start date
Mark Harley
Expedition Leader
Did you ask him to post his build here?
youwillforget
Adventurer
I sure did Mark, I even wrote it down for them.
Tonight I repaired the hydraulic line on my uncles tractor and drug my next project out of the woods.
it is going to be a bit bigger than the last project.
Tonight I repaired the hydraulic line on my uncles tractor and drug my next project out of the woods.
it is going to be a bit bigger than the last project.
Mark Harley
Expedition Leader
Digging that RED GMC!
Looking forward to the build, Any plans yet?
I would say a spring over is in order just for a little height.
A giant tear drop? or toy hauler would be cool.
Keep us posted.
Looking forward to the build, Any plans yet?
I would say a spring over is in order just for a little height.
A giant tear drop? or toy hauler would be cool.
Keep us posted.
youwillforget
Adventurer
I love the Red.
This is a full size build I'm building upon request and to see how hard a full size is to build.
This is how it looked when I pulled it out of the woods
Here is my daughter helping me remove the LP lines.
All the LP lines, LP tank bracket, Battery tray and Black/Gray water tank brackets removed.
Vin Check completed, I will mail in the VIN application tomorrow.
This is a full size build I'm building upon request and to see how hard a full size is to build.
This is how it looked when I pulled it out of the woods
Here is my daughter helping me remove the LP lines.
All the LP lines, LP tank bracket, Battery tray and Black/Gray water tank brackets removed.
Vin Check completed, I will mail in the VIN application tomorrow.
Mark Harley
Expedition Leader
Off to a clean start! Looks straight and sold.
Good find. Let the build begin.
Good find. Let the build begin.
youwillforget
Adventurer
I'm really looking forward to it Mark.
Took the frame to the Truck Stop scales
Steer Axel 2800
Drive Axel 2120
Trailer Axel 740
Truck Total 5660
I tried to weigh the trailer unhooked but the scale wouldn’t record it the guy said it read just over 800.
It didn’t seem right with 2120 for the drive axel so I took the trailer home and went and got my 16' utility trailer.
Steer axel 2760
Drive axel 1440
Trailer axel 1420
Truck total 5620
I don’t see how a finished trailer GVW could be 40 lbs lighter than the frame alone. I am going to take the frame back tomorrow and re wegh it and see if the numbers come out diffrent. there is no way it has 640 lbs of tongue weight I can pick it up with 1 hand.
Took the frame to the Truck Stop scales
Steer Axel 2800
Drive Axel 2120
Trailer Axel 740
Truck Total 5660
I tried to weigh the trailer unhooked but the scale wouldn’t record it the guy said it read just over 800.
It didn’t seem right with 2120 for the drive axel so I took the trailer home and went and got my 16' utility trailer.
Steer axel 2760
Drive axel 1440
Trailer axel 1420
Truck total 5620
I don’t see how a finished trailer GVW could be 40 lbs lighter than the frame alone. I am going to take the frame back tomorrow and re wegh it and see if the numbers come out diffrent. there is no way it has 640 lbs of tongue weight I can pick it up with 1 hand.
youwillforget
Adventurer
I took it back to the scales today.
Steer axle 2840
Drive axle 2000
Trailer axle 0
Total 4840
Then
Steer axle 2820
Drive axle 2120
Trailer axle 740
Total 5680
Trailer weight 840
I have no idea what happened with the utility trailer looks like when my brother gets back in town with it and my 4 wheelers I will have to go back to the scales.
Steer axle 2840
Drive axle 2000
Trailer axle 0
Total 4840
Then
Steer axle 2820
Drive axle 2120
Trailer axle 740
Total 5680
Trailer weight 840
I have no idea what happened with the utility trailer looks like when my brother gets back in town with it and my 4 wheelers I will have to go back to the scales.
youwillforget
Adventurer
Boarder started.
Cutting the wood.
Everything cut and waiting to be assembled.
103 degrees and 90% humidity its as far as I could get before I had to shower and go back into work.
youwillforget
Adventurer
Purlins started, this heat and going back to work 3 hours after I get off work is rough and hard to get much done.
Mark Harley
Expedition Leader
Interesting! What are the plans? A super size teardrop?
youwillforget
Adventurer
It is going to be a box trailer that looks like a FEMA trailer with no windows and 24 inch deep shelves on each side. One of the guys I work wants to sell junk at Flea Markets so I'm building a trailer. I hope he likes it well enough to trade his 2002 Nisan Frontier for it.
almost ready for plywood
almost ready for plywood
Mark Harley
Expedition Leader
Nice work,
I find some of my best purchases at flea markets, and yard sales.
I find some of my best purchases at flea markets, and yard sales.
youwillforget
Adventurer
Took the trailer to my Aunt's house this weekend
Laid some 2 inch slices of 8X16 inch blocks.
600 mile round trip went well 60mph most of the way it tows well up to 70mph but the RPM's are around 2000 and that hurts MPG so I backed off to 60 and let anyone that wanted to pass me.
Tonight I laid down 5 Sheets of 5/8 inch plywood 2 of them are screwed and liquid nailed down. I plan on having the walls framed this week.
youwillforget
Adventurer
Score!
I went back to the original owners property where the camper was torn down and lots of the bits were still there. Wheel skirts, fender tins, cargo door and main door. They are in ok shape good enough to install for size now and replace later as needed.
I went back to the original owners property where the camper was torn down and lots of the bits were still there. Wheel skirts, fender tins, cargo door and main door. They are in ok shape good enough to install for size now and replace later as needed.