Inexpensive LED flood lights.

[teotwaki]

I installed some blitzpro 6inch floods. So far they are working really well. They cost a fraction of a similar Rigid Industries/VisionX bar.

Thanks for the info on the lights! Nice build thread too! :sombrero:

 

[barlowrs]

Do you have a pic of how they are mounted

They are just mounted where my PIAA 510 fogs use to mount. They bolt right up so if you have a bumper made for PIAA 510 or similar fogs, they should bolt right up.

 

[bat]

My bad I was thinking of a stock bumper

 

[LexusAllTerrain]

That output would make a horrible and unsafe foglight.

Then look at these!

For 10.00 dollars more and fog ready!





http://blitzpro.com/12v-led-lights/amber-led-dust-light.html

 

[craig333]

Right after they say "fog ready" it lists 'Beam pattern: Flood'. Floods do not make good fog lights. Completely different beam pattern.

 

[zukrider]

well, hear are some pics.

with these, i think i will buy a second and aim so they just cross each other in the center. should cover 5 or so feet out each side and make a real good pattern for reversing on trail, work lights, trailer hitching, etc...

well, i guess photobucket and expo are being difficult, so here is a link to see them

http://s270.beta.photobucket.com/user/josephfrank/library/Blitzpro 3LR 4 led round pod

 

[88Xj]

Do you hAVE A LINK TO more pictures?

They look very nice!

Sorry missed ya lol. I can pm you links to my images if you'd like. I'm still waiting on Brian to get back with me.

 

[rb70383]

I have a set of Xj88's pod lights. 4 x 4 16W leds, with an amber filter. Bright they are. Cant use them as fogs only because of the pattern. Not upper cutoff, but they are excellent aux lights. They just about overpower the low beams. I have them mounted on a Carr Lightwing on a 98 ZJ. I can post pics if needed.

 

[05nissanXterra]

Needed, we need Picts!!!


Sent from my iPhone using Tapatalk

 

[markrez]

I have a set of Xj88's pod lights. .... I have them mounted on a Carr Lightwing on a 98 ZJ. I can post pics if needed.

Yes, pictures please.

 

[88Xj]

I have a set of Xj88's pod lights. 4 x 4 16W leds, with an amber filter. Bright they are. Cant use them as fogs only because of the pattern. Not upper cutoff, but they are excellent aux lights. They just about overpower the low beams. I have them mounted on a Carr Lightwing on a 98 ZJ. I can post pics if needed.

Clear or yellow would have even more output as well..the yellow cuts out some lumens & the amber even more but all lights are this way, they are still WAY to bright.
I do however offer a 2x2 pod in flood or spot. Runs a single 10W Cree chip, and the flood would make a great flood I think! I'll get some pics up for ya's.

 

[irish_11]

I am thinking of running a pair of the 6" bars on either side of my rack for alley lights. What is the group though on this? I have recently started volunteering with search and rescue and need some exterior lighting. I already have PFrans LED backup lights (nice and bright), but I was thinking of adding one of the 6” lights out back as well. What is the effective range? I have seen the photos but I cannot tell due to the exposure. I think they would make good alley/backup lights. Would the 6” bars or the 3LR rounds put out more light?

 

[Haf-E]

The 6" LED bars are only 6 watts - so the 3LR's would probably be brighter as they are listed as being four 3w LEDs or 12 watts total.

That said - the 6" bars are pretty bright - but the spread is pretty wide for "alley" lights perhaps. I would say they illuminate well out to about 50 feet.

 

[no-pistons]

T4RMAN, Do you have any pictures showing how the lights are mounted to your roof rack? Thanks.

 

[rb70383]

Oops, actually I do have the yellow.