I'm selling my B&W custom bed due to the city's code requirement of prohibiting flat beds parking in residential areas. The city considers the bed to be a flat bed. City code 3-8-B-2 A-1-f states other than a factory designed cab and truck bed, so basically anything not factory made is prohibited. The city defines 'factory' as the original manufacturer of the truck and not the finisher. I've been fighting the city since September on this. There is a city complainer in my neighborhood.
My truck is a 05 F350 C&C. I picked up a slightly dented long bed to replace it with rather cheap. There will be mods to the bed to make the truck look factory. However, the bed will be sitting 4" farther back due to the longer C&C wheelbase. Since the C&C frame rails are completely flat and 4" skinnier in overall width, the bed support rails will need 'adjustment' to fit it to the F350 frame. I still have to get a waiver from the city since the original design of the truck is not to have a pickup bed on it.
I started out at $3500 for the B&W bed and after 3 months, I'm getting $1500 for it.
My truck is a 05 F350 C&C. I picked up a slightly dented long bed to replace it with rather cheap. There will be mods to the bed to make the truck look factory. However, the bed will be sitting 4" farther back due to the longer C&C wheelbase. Since the C&C frame rails are completely flat and 4" skinnier in overall width, the bed support rails will need 'adjustment' to fit it to the F350 frame. I still have to get a waiver from the city since the original design of the truck is not to have a pickup bed on it.
I started out at $3500 for the B&W bed and after 3 months, I'm getting $1500 for it.