tdhunter13
Observer
Hey all, over the last week or so I have started to notice a squeak (non-brake related) in the back of the LR3. It is intermittent and only noticeable <30mph and with the windows down. I did some research and found a few similar cases (see links below) and in all instances they traced it to either the upper or lower rear knuckle bushings. (The bushings that actually connect the control arms to the knuckle/hub assembly, not to be confused with control arm bushings.) My question is has anyone here dealt with this before, if so, how hard is it to do myself? The parts run about $100 per side for "everything", so I figured it might be worth doing it myself. I am going to jack it up this evening and check that it is for sure those bushing and not something else. So, any thoughts/suggestions are helpful.
Reference Material:
Click Me
Click Me Too
Reference Material:
Click Me
Click Me Too