Quick update.
OME suspension is in. I bought slightly used fronts (OME 885 with N140S already mounted to the top plate and used about 5k miles) along with new OME rear shocks and Dakars, from which I removed the third leaf. The front had already settled, so I saw almost exactly 2" of lift; the rear netted just a tad over 2". Perfect.
Also installed OE running boards. I've found a fabrication guy who thinks we can do up some sliders that will go with/under the running boards without sacrificing too much breakover clearance. They'll be something like square tube off the frame, then something flattish that goes across under the factory boards. Will post up progress/results once I get that underway.
The tires (and 17" OE Sport wheels) have been on for a while and I finished the suspension install a month or so ago but haven't had time to take any good photos. Even these were impromptu. I put the running boards on yesterday and figured it time to get at least a snapshot or two, so I pulled off into a dirt lot on my way to pick up dog food last night. Heh. Truck is dirty, lighting wasn't perfect and this isn't exactly trail action ... so take them for what they are.
click on any to get a slightly larger size