Trailer Fenders

[AndrewDM]

Where can I find trailer fenders that are 12" wide? I am looking for m416 style fenders that can be bolted to the tub. My trailer was built by the now defunct 4x4 Trailers, LTD. Googleing only finds the usual trailer suppliers with a 10" wide fender.

-Andy

 

[Mark Harley]

Have them made.

Use your original fender as a pattern and make it as wide as you wish.

Here are several metal fabricators in the area.

http://www.yellowpages.com/woodstock-ga/sheet-metal-fabricators

 

[AndrewDM]

Thanks Mark. I was thinking that was the way I would need to go.

 

[cowboy4x4]

Redneck trailer supply, they have stores in several states and they ship as well.

 

[Firehawkclone]

I haven't checked the meassurements on my bantam trailer, but I found these on google and eBay.
http://www.etrailer.com/Trailer-Fenders/Redline/F13X36-1R.html

 

[AndrewDM]

Redneck trailer supply, they have stores in several states and they ship as well.

I downloaded their catalog and they carry fenders up to 10" wide.

I haven't checked the meassurements on my bantam trailer, but I found these on google and eBay.
http://www.etrailer.com/Trailer-Fenders/Redline/F13X36-1R.html

Now those will cover them and then some, 13" wide. Only they're round and weld on.
I'm seriously thinking of building tube fenders that will bolt to the frame and tub. I appreciate the responses.

-Andy

 

[Flyfishjeep]

I believe Sierra 4 x 4 trailers makes 12" fenders in the M416 style....you may want to check with them

 

[sneakytj]

http://www.kaiserwillys.com/product/1718/willys-jeep-body-trailer-pickup-bed-parts-accessories

They sell the entire replacement tub along with some other parts.

 

[AndrewDM]

Problem Solved

Thanks to Josh at Manley ORV, I now have fenders that work with the wheel spacers and 31" tires. The original round fenders that came on my trailer were removed and tossed when I repainted it two years ago. At that time, I installed 10" wide fenders from Northern Tool. These worked ok as I had moved the axle below the springs for clearance and to raise the trailer to match my Jeep at the time. My current Jeep is not lifted and the axle needed to move back above the springs to lower the trailer to match the new Jeep.

Comparison of old and new.

These fender completely cover the wheels.

Thanks again Josh.

Andy

 

[Mark Harley]

Very nice!

Josh is a great guy and his trailers are cool!

 

[ManleyORV]

Thanks to Josh at Manley ORV, I now have fenders that work with the wheel spacers and 31" tires. The original round fenders that came on my trailer were removed and tossed when I repainted it two years ago. At that time, I installed 10" wide fenders from Northern Tool. These worked ok as I had moved the axle below the springs for clearance and to raise the trailer to match my Jeep at the time. My current Jeep is not lifted and the axle needed to move back above the springs to lower the trailer to match the new Jeep.

Comparison of old and new.

These fender completely cover the wheels.

Thanks again Josh.

Andy

No problem, glad we could help out. Fenders look great on there. Have a side shot?

-Josh

 

[AndrewDM]

No problem, glad we could help out. Fenders look great on there. Have a side shot?

-Josh

Here you go....

 

[ManleyORV]

Here you go....

Perfect fit!

 

[Adventure IQ]

Perfect fit!

Wow....will be in contact with you guys on my build!


www.AdventureIQ.com
Facebook Me! http://www.facebook.com/pages/Adventure-IQ/210030892407247
Adventute Journal http://adventureiq.wordpress.com/

 

[Adventure IQ]

Here is what we wound up doing with scrap laying around


www.AdventureIQ.com
Facebook Me! http://www.facebook.com/pages/Adventure-IQ/210030892407247
Adventute Journal http://adventureiq.wordpress.com/