RedRunner's 2016 SR5 Build and Adventure Thread

RedRunner87

Active member
On to my 3rd 4Runner, 2016 Barcelona Red SR5. I am coming from a 1996 E-locked Limited. I am bummed about losing the E-locker, but I am pretty excited about getting into a vehicle will less miles. This is my wife DD and my weekend adventure rig, so the build will be nice and slow. Here is the starting point:

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
 

RedRunner87

Active member
As she currently sits:

IMG_9114 by Red Runner, on Flickr

GOAL LIST
-Front Winch Bumper
-X20 Winch
-Combo Light Bar
-Dobinson Lift/Eibach Lift*Bought*Ironman Foam Cell Pro
-TSO FAUX TRD Pro Grill
-TRD Pro Upper Grill w/ Raptor Lights
-Trail Wheels
-255/80r17 Falken WildPeak AT3W
-Rock Sliders Sliders (Ordered)
-Detours of Maine Spare Tire Carrier
-C4 Fab Ladder

Mods on the truck right now!

Suspension:
- Ironman Stage 2 W/ Performance Springs
- Ironman UCA's

Wheels:
- WildPeak AT3'w 255/80R17
- Stock SR5 dipped Bronze

Interior:
- Center Console Organizer
- Glove Box Organizer
- CaliRaisedLED OEM Style Ditch Light Bracket
- Full LED Replacements

Exterior:
- Raptor Lights
- Full LED Replacements
- RAV4 Mirros
- Trail Standard Offroad Pro Grill
- CaliRaisedLed Ditch Light Brackets
- Amazon Ditch Lights
- High Angle Cut

Armor:
- Stock Skids
- Avid Off-Road Sliders

Electrical:
- 5 4-pin Relays
- 10-Way Blade Fuse Box
- 50 AMP Circuit Breaker

Planned Mods:

PHASE 1
-Full LED Exterior Lighting
-Full LED Interior Lighting

PHASE 2
-Dobinson Extended Travel Front/Dobinson Rear Lift or Eibach Lift*Bought*Ironman Foam Cell Pro
-255/75r17 Falken WildPeaks AT3W
-CaliRaisedLED Ditch Light Brackets
-Extreme LED Ditch Light*Bought*Amazon Ditch Lights
-High Angle Cut
-Rock Sliders
-Drawers

PHASE 3
-C4 Ladder
-Winch Bumper Bumper
-Detours of Maine Spare Tire
-Dobinson Snorkel

4Runner To Do List (UPDATED:4/15)
- Dip Wheels (Completed)
- Dip Center Caps (Completed)
- Shark Fin (Installed)
- Dip Shark Fin (Completed)
- Dip Roof Rails (Completed)
- Replace Center Amber Grill Light (Completed)
- Lift[s/] (Completed)
- Wheel Spacers (Installed)
- Remove Front Mud Flap (Completed)
- Metal Oil Filter Housing(Installed)
- Cabin Air Filter(Installed)
- Door handle (Completed)
- High Clearance Cut(Completed)
- Ditch Light Bracket(Installed)
- Ditch Lights (Installed)
- Reflective Window Covers (6 of 7 Completed)

Phoenix To Do List
- Install Cross Bars
- Drill Cross Bars for Hi Lift
- Trim Rear Mud Flaps

- Touch Up Roof Rails
- Lift
- Install Rock Sliders
- Install Drawers

Trail Runs:

Enchanted Rockies Trail: https://expeditionportal.com/forum/threads/enchanted-rockies-trail.215538/
Mosquito Pass/Weston Pass: https://expeditionportal.com/forum/threads/labor-day-overland-trip-mosquito-pass-weston-pass-bald-mountain-gulch.218551/#
Rimrocker Trail/White Rim Trail/Top of the World: https://expeditionportal.com/forum/threads/rimrocker-white-rim-and-top-of-the-world.218914/
 
Last edited:

RedRunner87

Active member
Received my AJT Design key fob in.
Untitled by redrunner87, on Flickr
Of course my transponder was glued in, but I ended up destroying the key fob around the transponder. The hardest part for me was getting the key out the fob.
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
After a lot of prying and heating got the last bit up plastic off. Ordered a second set of red buttons so I can have the red panic button. I'll update when I get it.
Untitled by redrunner87, on Flickr
 

RedRunner87

Active member
My buddy SWEARS by AMSOIL, so I decided to give them a shot. Did a quick Engine Flush, since I don't know the maintenance history before we bought it. I am bummed the TRD Pro grill is buried in our storage unit so I couldn't get that installed.

Untitled by redrunner87, on Flickr
 

RedRunner87

Active member
Mt. Baldy, CO. Went out with a local Tacoma group. This was first trip with the 4Runner. She did pretty well considering I have ************ street tires on her. Used ATRAC once on a super flex part, that I took a bad line on.

by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
 

AggieOE

Trying to escape the city
Looks good so far! Glad to see another SR5 doing what it's designed to do! Where did you find those Rav4 Mirrors? Was that hard to install? Looks like a direct fit.
 

RedRunner87

Active member
Looks good so far! Glad to see another SR5 doing what it's designed to do! Where did you find those Rav4 Mirrors? Was that hard to install? Looks like a direct fit.

I can grab the part number for you if you want. They are direct fit and the heated element still works. Install was super easy, pop the old mirror off, pull the plug. Put plug into Rav4 mirror and pop mirror back in.

87961-42D20
87931-42D50
 

RedRunner87

Active member
Finally after having it for almost a year and half, I have installed the OG Trail Standard Offroad Faux TRD Pro grill. Haven't wired up the lights, because my dummy head ordered full size fuse taps and not the mine. Hopefully I can get that done this week.

All Stock SR5
Untitled by redrunner87, on Flickr

Tapped off the headlights and bumper to protect the paint
Untitled by redrunner87, on Flickr

Cleaned the stock grill with dish soap so hopefully the TSO Grill will adhere better and its on!
Untitled by redrunner87, on Flickr

Upper grilled installed
Untitled by redrunner87, on Flickr

Finished product
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
 

Forum statistics

Threads
190,139
Messages
2,924,332
Members
233,417
Latest member
dhuss
Top